Identifying the parts

#¶

#•

#ª $º $¡ $™ $£ $¢ $￿

#¶ Eyecup

#• VIEW FINDER jack (p. 20) #ª S VIDEO OUT jack (p. 34) $º RFU DC OUT jack (p. 35)

$¡ DV IN/OUT jack (p. 74) Connect DV products using the connecting DV cable.

This “i.LINK” mark is a trademark of Sony Corporation and indicates that this product is in agreement with IEEE 1394- 1995 specifications and their revisions.

The DV IN/OUT jack is i.LINK compatible.

$™ CH-1 LINE/MIC switch (p. 65)

Set to change the audio source using a CH-1 input.

$£ CH-1 ATT switch (p. 67)

Set ON to attenuate the CH-1 input microphone level.

$¢ CH-2 LINE/MIC switch (p. 65)

Set to change the audio source using CH-2 input.

$￿ CH-2 ATT switch (p. 67)

Set ON to attenuate the CH-2 input microphone level.

$§ $¶ $• $ª %º %¡ %™ %£ %¢ %￿ %§ %¶ %•

$§ MIC (PLUG IN POWER) jack (p. 28) Connect an external mini jack type microphone (not supplied). This jack also accepts a “plug-in-power” microphone. When using this jack, set LINE/MIC to MIC FRONT.

$¶ DIRECTION SELECT switch (p. 29) Set to change the directionality of the built-in microphone.

$• Built-in microphone (p. 65)

$ª Microphone wind screen screw Loosen to remove wind screen.

%º MIC switch (p. 67)

Set ATT to attenuate the built-in microphone and external microphone connected to MIC (PLUG IN POWER) level.

%¡ Lens hood screw

%™ Power zoom button (p. 30) %£ PHOTO button (p. 46)

Press to shoot in photo mode.

%¢ STANDBY (LOCK/STANDBY/PHOTO STANDBY) switch (p. 26)

%￿ START/STOP button (p. 26) %§ BUILT-IN MIC switch (p. 67)

If recording when there is a loud wind using the built-in microphone, set to WIND.

%¶ AUDIO OUT/VIDEO OUT jacks (p. 34) %• DC IN jack (p. 38)

8