AC timer recording
Recording source (external tuner, etc.)
Set EXTERNAL TIMER to “REC”
VIDEO IN
to a wall outlet
Note
In case recording is impossible because the safety switch on the cassette is slid to red, the cassette is ejected when the power turns on at a preset time.
By connecting this VCR to an external AC timer (not supplied), you can start recording at a preset time.
1 Connect this VCR to an external AC timer (not supplied).
2 Insert a blank tape.
3 Press INPUT SELECT to select the recording source.
4 Set the
At the preset time, the power of this VCR and the recording source turn on automatically and recording starts about several to 10 seconds later. Set the timer allowing a margin for the recording to start.
5 Set the EXTERNAL TIMER switch at the rear to “REC.”
You need not press rREC.
If the tape ends before the recording source stops operation
The tape stops without rewinding.
To stop recording durng the timer recording
Press pSTOP.
To release AC timer recording
Set the EXTERNAL TIMER switch to “OFF.”
Caution
While a tape is running, do not turn off the power using an AC timer. The VCR and a tape may be damaged. When turning off the power of the VCR, make sure to press pon this VCR first to stop the tape, then turn off the power.
Recording 33 EN