Using alternative power sources
Using the house current (mains)
To use the supplied AC power adaptor:
(1) Open the DC IN jack cover, and connect the AC power adaptor to the DC IN jack on the camcorder.
(2) Connect the power cord (mains lead) to the AC power adaptor.
(3) Connect the power cord (mains lead) to a wall outlet (mains).
1 | 2, 3 |
| operationsAdvanced |
WARNING
The power cord (mains lead) must be changed only at a qualified service shop.
PRECAUTION
The set is not disconnected from the AC power source (house current/mains) as long as it is connected to the power cord (mains lead), even if the set itself has been turned off.
Note
Keep the AC power adaptor away from the camcorder if the picture is disturbed.
27