Started Getting

TV Hookups

If you connect the player to a monitor or projector having component video input connectors that conform to the output signals from the COMPONENT VIDEO OUT (Y, CB,

CR) connectors on the player

Connect the component via the COMPONENT VIDEO OUT connectors using three video connecting cords (not supplied) of the same kind. You will get a better picture.

Set “LINE” in “CUSTOM SETUP” to “VIDEO” or “S VIDEO” in the setup display, and set “COMPONENT OUT” to “ON” (page 70).

In order to set COMPONENT OUT to ON, you must first connect the player to a projector or monitor using the LINE-1 connector so that the setup display appears on your screen.

 

Monitor or projector

 

with component video

CD/DVD player

input connectors

COMPONENT

VIDEO IN

COMPONENT

Notes

•Refer to the instructions supplied with the component to be connected.

•Do not connect this player to a video deck. If you do, noise may appear in the picture.

VCRTV

CD/DVDConnect

playerdirectly

•Depending on the TV or receiver (amplifier), sound distortion may occur because the audio output level is high. In this case, set “AUDIO ATT” in “AUDIO SETUP” to “ON” in the setup display. For details, see page 74.

•If you cannot view the pictures from a VCR through this player which is connected to a TV with RGB component connectors,

setto t(Audio/Video) on your TV. When you select (RGB), the TV cannot receive the signal from the VCR.

• If you want to use your VCR’s SmartLink function, connect the

VIDEO OUT

Y

VCR to your TV’s SmartLink connector and connect the CD/

DVD player to the TV with another connector.

Y CB CRCB

CR

• When you connect the player to your TV via the SCART

(EURO AV) connectors, the TV’s input source is set to the

player automatically when you start playback or press any

button except for ! on the player or @/1 on the remote. In this

case, press TV/DVD on the remote to return the input to the

TV.

• When you set “LINE” in “CUSTOM SETUP” to “RGB,” you

cannot select the item “COMPONENT OUT” in “CUSTOM

SETUP.” For details, see page 70.

• If you want to enjoy the picture’s RGB signals via the LINE-1

(RGB) connector, set “COMPONENT OUT” in the “CUSTOM

SETUP” to “OFF,” then set “LINE” to “RGB” in the setup

display. For details, see page 70.

• When you connect the player to a monitor or projector via only

the COMPONENT VIDEO OUT connectors, do not select

“OFF” in “COMPONENT OUT” under “CUSTOM SETUP.” If

you select “OFF” in this case, the picture may not appear.

10