Custom Settings (CUSTOM SETUP)

and Settings Adjustments

“CUSTOM SETUP” allows you to set the playback conditions.

The default settings are underlined.

Select “CUSTOM SETUP” in the setup display.

 

 

 

CUSTOM SETUP

 

 

 

 

 

 

 

COMPONENT OUT:

OFF

 

 

 

 

LINE:

 

VIDEO

 

 

 

 

AUTO PLAY:

OFF

 

 

 

 

DIMMER:

 

BRIGHT

 

 

 

 

PAUSE MODE:

AUTO

 

 

 

 

BOOKMARK RESET

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PARENTAL CONTROL

 

 

 

 

 

 

 

ON

 

 

 

 

PLAYBACK MEMORY:

 

 

 

 

TRACK SELECTION:

OFF

 

 

 

 

 

 

 

 

 

 

To set, press

, then ENTER .

 

 

 

 

To quit, press

DISPLAY .

 

 

 

xCOMPONENT OUT

Selects the methods of outputting video signals from the COMPONENT VIDEO OUT (Y, CB, CR) connectors on the rear panel of the player.

In order to set COMPONENT OUT to ON, you must first connect the player to a projector or monitor using the LINE-1 connector so that the setup display appears on your screen.

•OFF: outputs no signals.

•ON: outputs the component video signals.

Notes

•When you set “LINE” to “RGB”, you cannot set “COMPONENT OUT” to “ON.”

•When you connect the player to a monitor or projector via only the COMPONENT VIDEO OUT connectors, do not select “OFF.” If you select “OFF” in this case, the picture may not appear.

xLINE

Selects the methods of outputting video signals from the LINE-1(RGB)–TV connector on the rear panel of the player.

•VIDEO: outputs the video signals.

•S VIDEO: outputs the S video signals.

•RGB: outputs the RGB signals.

Notes

•If your TV does not conform to the S video or the RGB signals, no picture appears on the TV screen even if you select “S VIDEO” or “RGB.” Refer to the instructions supplied with your TV.

•If your TV has only one SCART (EURO AV) connector, do not select “S VIDEO.”

xAUTO PLAY

Selects the Auto Play setting when you connect the AC power cord to the AC outlet (mains).

•OFF: does not use “TIMER,” “DEMO1” or “DEMO2” to start playback.

•TIMER: starts playing when the player is turned on, or at any time you want when connected to a timer (not supplied). Set the timer when the player is in standby mode (the power indicator lights up in red).

•DEMO1: starts playing the first demonstration automatically.

•DEMO2: starts playing the second demonstration automatically.

xDIMMER

Adjusts the lighting of the front panel display.

•BRIGHT: makes the front panel display bright.

•DARK: makes the front panel display dark.

•OFF: turns off the lighting of the front panel display.

z

You also can adjust the lighting with the DIMMER button on the player.

xPAUSE MODE (DVD only)

Selects the picture in pause mode.

• AUTO: A picture, including subjects that move dynamically, is output with no jitter. Normally select this position.

• FRAME: A picture including subjects that do not move dynamically is output with high resolution.

xBOOKMARK RESET,

Select “BOOKMARK RESET,.” The BOOKMARK RESET display appears. And then press ENTER to reset all bookmarks.

xPARENTAL CONTROL,

Sets a password and playback limitation level for DVDs with playback limitation for children.

The same password is used for both Parental Control and Custom Parental Control (page 53) .

For details, see “Limiting Playback by Children (Parental Control) .”

70