Setups for the player

Some setup adjustments are necessary for the player depending on the TV or other components to be connected.

Use the setup display to change the various settings. For details on using the setup display, see page 64.

•To connect the player to a wide-screen TV

In the setup display, set “TV TYPE” in “SCREEN SETUP” to “16:9” (default setting). For details, see page 68.

•To connect the player to a normal TV

In the setup display, set “TV TYPE” in “SCREEN SETUP” to “4:3 LETTER BOX” or “4:3 PAN SCAN.” For details, see page 68.

•To connect the player to a TV or VCR via a SCART (EURO AV) connector that conforms to the S video signals or RGB signals

In the setup display, set “LINE” in “CUSTOM SETUP” to “S VIDEO” or “RGB.” For details, see page 70.

•To connect the player to a monitor or ojectorpr with component video input connectors that conform to the output signals from the COMPONENT VIDEO

OUT (Y, CB, CR) connectors on the player

In the setup display, set “COMPONENT OUT” in

“CUSTOM SETUP” to “ON”. For details, see page 70.

When you play a disc recorded in the NTSC color system, the player outputs the video signal or the setup display etc. in the NTSC color system and the picture may not appear on PAL color system televisions. In this case, open the disc tray and remove the disc.

Started Getting

11