D-1 : Connecting to the 5.1ch input jacks

You can enjoy 5.1ch surround sound using the internal Dolby Digital, DTS, or Super Audio CD Multi decoder of this player.

D-2or D-3 : Connecting to a digital jack

This connection will allow you to use the Dolby Digital, or DTS decoder function of your AV amplifier (receiver).

zHints

•For correct speaker placement, refer to the instructions of the connected components.

•To enhance the sound performance:

–Use high-performance speakers.

–Use front, rear, and center speakers of the same size and performance.

–Place the subwoofer between the left and right front speakers.

Notes

For connection D-2or D-3

•After you have completed the connection, be sure to set “DOLBY DIGITAL” to “DOLBY DIGITAL” and “DTS” to “DTS” in Quick Setup (page 26).

•When you connect an amplifier (receiver) that conforms to the 96 kHz sampling frequency, set “48kHz/96kHz PCM” in “AUDIO SETUP” to “96kHz/24bit” (page 74).

•Super Audio CD audio signals are not output from the DIGITAL OUT (COAXIAL or OPTICAL)/ HDMI OUT jack.

•When you connect the player to an AV amplifier (receiver) using an HDMI cord, you will need to do one of the following:

–Connect the AV amplifier (receiver) to the TV with the HDMI cord.

–Connect the player to the TV with a video cord other than HDMI cord (component video cord, S VIDEO cord, or audio/video cord).

Hookups

25