◆DIGITAL OUT (except Super Audio CD)

Selects if audio signals are output via the DIGITAL OUT (COAXIAL or OPTICAL) jack.

ON Normally select this position.

OFF The influence of the digital circuit upon the analog circuit is minimal.If you are using the HDMI OUT jack, PCM sound will be output depending on the connected equipment.

If the signal is encrypted for copyright protection purposes, the signal is only output as 48 kHz/16 bit PCM.

◆48 kHz/96 kHz PCM (DVD VIDEO only)

Selects the sampling frequency of the audio signal.

48kHz/16bit The audio signals of DVD VIDEOs are always converted to 48 kHz/16 bit.

96kHz/24bit All types of signals including 96 kHz/24 bit are output in their original format. However, if the signal is encrypted for copyright protection purposes, the signal is only output as 48kHz/16bit.

◆DOLBY DIGITAL (DVD VIDEO/DVD-RW only)

Selects the type of Dolby Digital signal.

D-PCM

Select this when the player is

 

connected to an audio

 

component lacking a built-in

 

Dolby Digital decoder. You can

 

select whether the signals

 

conform to Dolby Surround

 

(Pro Logic) or not by making

 

adjustments to the

 

“DOWNMIX” item in

 

“AUDIO SETUP” (page 73).

 

 

DOLBY

Select this when the player is

DIGITAL

connected to an audio

 

component with a built-in

 

Dolby Digital decoder.

 

 

◆DTS (DVD VIDEO/DTS-CD)

Selects the type of DTS signal.

D-PCM

Select this when the player is

 

connected to an audio

 

component without a built-in

 

DTS decoder.

 

 

DTS

Select this when the player is

 

connected to an audio

 

component with a built-in DTS

 

decoder.

 

 

Note

When “DTS” is set to “DTS” and a DTS-CD is played back, audio signals are not output from the AUDIO OUT L/R 1/2 jacks. When a component that cannot receive the stream signal of DTS is connected to the HDMI OUT jack, audio signals are not output from the HDMI OUT jack.

Notes

•The analog audio signals from the AUDIO OUT L/R 1/2 jacks and 5.1CH OUTPUT jacks are not affected by this setting.

•If the HDMI OUT jack is connected to equipment not compatible with 96 kHz/24 bit signals,

48 kHz/16 bit PCM will be automatically output even when you select “96 kHz/24 bit.”

•Super Audio CD audio signals are not output from the DIGITAL OUT (COAXIAL or OPTICAL)/ HDMI OUT jack.

•If you connect a component that does not conform to the selected audio signal, a loud noise (or no sound) will come out from the speakers, damaging your ears or speakers.

◆AUDIO (HDMI)

Selects the type of audio signal output from the HDMI OUT jack.

AUTO

Normally, select this. Outputs

 

audio signals according to the

 

“DIGITAL OUT” settings

 

(page 74).

 

 

PCM

Converts Dolby Digital, DTS,

 

or 96 kHz/24 bit PCM signals to

 

48 kHz/16 bit PCM.

 

 

Note

A loud noise (or no sound) will be output if you connect the player to a TV that is not compatible with DOLBY DIGITAL/DTS signals and “AUTO” is selected. In this case, select “PCM.”

74