Enjoying the surround sound effects

To enjoy the surround sound effects of this player or your amplifier (receiver), set the following items as described below for the audio connection you selected on pages 22 to 25 ( B through D ). Each of these is the default setting and does not need to be adjusted when you first connect the player. See page 68 for using the Setup Display.

Audio connection (pages 21 to 25)

A

• No additional settings are needed.

B-1 C-1 D-3

•Set “DOWNMIX” to “DOLBY SURROUND” (page 73).

B-2 C-2 D-2

•Set “DOWNMIX” to “DOLBY SURROUND” (page 73).

•Set “DIGITAL OUT” to “ON” (page 74).

D-1

•Set “DISTANCE” and “LEVEL” according to the connected speakers (page 76).

zHints

• For connections B-1C-1D-1

If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 73).

• For connections B-2C-2D-2D-3

Set “48 kHz/96 kHz PCM” to “96 kHZ/24 bit” only if you connect an amplifier (receiver) that conforms to the 96 kHz sampling frequency (page 74).

Hookups

29