Sony DVP-NS77H 62US, Dolby Digital DVDs only, Dts, 48kHz/96kHz PCM DVD Video only, Audio Hdmi

◆DOLBY DIGITAL (DVDs only)

Selects the type of Dolby Digital signal.

D-PCM	Select this when the player is
	connected to an audio
	component without a built-in
	Dolby Digital decoder. You can
	select whether the signals
	conform to Dolby Surround
	(Pro Logic) or not by making
	adjustments to the
	“DOWNMIX” item in
	“AUDIO SETUP” (page 61).
DOLBY	Select this when the player is
DIGITAL	connected to an audio
	component with a built-in
	Dolby Digital decoder.

Note

If the HDMI OUT jack is connected to equipment not compatible with DOLBY DIGITAL signals, the “D-PCM” signals will be automatically output even when you select “DOLBY DIGITAL.”

◆DTS

Select the type of DTS audio signals.

OFF	Select this when the player is
	connected to an audio
	component without a built-in
	DTS decoder.
ON	Select this when the player is
	connected to an audio
	component with a built-in DTS
	decoder.

Note

If the HDMI OUT jack is connected to equipment not compatible with DTS signals, the “OFF” signals will be automatically output even when you select “ON.”

◆48kHz/96kHz PCM (DVD VIDEO only)

Selects the sampling frequency of the audio signal.

48kHz/16bit The audio signals of DVD VIDEOs are always converted to 48kHz/16bit.

96kHz/24bit All types of signals including 96kHz/24bit are output in their original format. However, if the signal is encrypted for copyright protection purposes, the signal is only output as 48kHz/16bit.

Notes

•The analog audio signals from the LINE OUT L/R (AUDIO) jacks are not affected by this setting and keep their original sampling frequency level.

•If the HDMI OUT jack is connected to equipment not compatible with 96 kHz/24 bit signals,

48 kHz/16 bit PCM will be automatically output even when you select “96kHz/24bit.”

◆AUDIO (HDMI)

Selects the type of audio signal output from the HDMI OUT jack.

AUTO	Normally, select this. Outputs
	audio signals according to the
	“DIGITAL OUT” settings
	(page 61).
PCM	Converts Dolby Digital, or
	96 kHz/24 bit PCM signals to
	48 kHz/16 bit PCM.

Note

A loud noise (or no sound) will be output if you connect the player to a TV that is not compatible with DOLBY DIGITAL/DTS signals and “AUTO” is selected. In this case, select “PCM.”

62US