Sony DVP-NS77H 25US, 10Press X/x to select the type, 11Press Enter, 13Press Enter

8 Press ENTER.

The Setup Display for selecting the type of jack used to connect your audio component appears.

Is this player connected to an amplifier (receiver)? Select the type of jack you are using.

YES

LINE OUTPUT L/R(AUDIO)

DIGITAL OUTPUT

NO

9 Press X/x to select the type of jack (if any) you are using to connect to an audio component, then press

ENTER.

If you did not connect an audio component, select “NO,” then go to step 13.

If you connected an audio component using just an audio cord, select “YES: LINE OUTPUT L/R (AUDIO),” then go to step 13.

If you connected an audio component using a digital coaxial or optical/HDMI cord, select “YES: DIGITAL OUTPUT.”

10Press X/x to select the type of

Dolby Digital signal you wish to send to your audio component.

If your audio component has a Dolby Digital decoder, select “DOLBY DIGITAL.” Otherwise, select “D-PCM.”

AUDIO SETUP

AUDIO DRC:		STANDARD
DOWNMIX:	DOLBY SURROUND
DIGITAL OUT:		ON
DOLBY DIGITAL:		D-PCM
DTS:		D-PCM

48kHz/96kHz PCM:	DOLBY DIGITAL
AUDIO (HDMI):	AUTO

11Press ENTER.

“DTS” is selected.

AUDIO SETUP

AUDIO DRC:		STANDARD
DOWNMIX:	DOLBY SURROUND
DIGITAL OUT:			ON
DOLBY DIGITAL:			D-PCM
DTS:			OFF
48kHz/96kHz PCM:			OFF
AUDIO (HDMI):			ON

12Press X/x to select whether or not you wish to send a DTS signal to your audio component.

If your audio component has a DTS decoder, select “ON.” Otherwise, select “OFF.”

13Press ENTER.

Quick Setup is finished. All connections and setup operations are complete.

Hookups

25US