Controlling Your TV with the Supplied Remote, 23US | Sony DVP-NS77H

Controlling Your TV with the Supplied Remote

You can control the sound level, input source, and power switch of your Sony TV with the supplied remote.

TV

	Number	VOL +/–
	buttons	VOL +/–
	buttons

TV/VIDEO

You can control your TV using the buttons below.

By pressing	You can
TV [/1	Turn the TV on or off

VOL +/–	Adjust the volume of the TV

TV/VIDEO	Switch the TV’s input source
	between the TV and other
	input sources

Note

•Depending on the connected unit, you may not be able to control your TV using all or some of the buttons on the supplied remote.

	Controlling other TVs with the
	remote
	You can control the sound level, input source,
	and power switch of non-Sony TVs as well.
	If your TV is listed in the table below, set the
	If your TV is listed in the table below, set the			Hookups
	appropriate manufacturer’s code.			Hookups
	appropriate manufacturer’s code.
	1 While holding down TV [/1, press the
	number buttons to select your TV’s
	manufacturer’s code (see the table
	below).
	2 Release TV [/1.

	Code numbers of controllable TVs
	If more than one code number is listed, try
	entering them one at a time until you find the
	one that works with your TV.

	Manufacturer	Code number

	Sony	01 (default)

	Daewoo	04, 22

	Hitachi	02, 04

	JVC	09

	LG/Goldstar	04

	MGA/Mitsubishi	04, 13

	Panasonic	19

	Philips	21

	RCA	04, 10

	Samsung	04, 20

	Sharp	18

	Toshiba	07, 18

Notes

•When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again.

•Depending on the connected unit, you may not be able to control your TV using all or some of the buttons on the supplied remote.

23US

Image 23

Sony DVP-NS77H operating instructions Controlling Your TV with the Supplied Remote, Controlling other TVs with Remote, 23US

Contents

CD/DVD 2US Use Installation Antennas Outdoor antenna grounding Service Important Notice Precautions Table of Contents Icons Meaning Settings and AdjustmentsAbout This Manual Additional Information Format of discs This Player Can Play the Following DiscsExample of discs that the player cannot play Region code Music discs encoded with copyright protection technologies Copyrights 10US Guide to Parts and ControlsFront panel Rear panel Front panel display When playing back a DVDWhen playing back a Video CD with Playback Control PBC + button has a tactile dot Remote12US Number 5 button has a tactile dot Press Display repeatedly Guide to the Control Menu DisplayControl Menu display To turn off the display List of Control Menu items 14US Effect Mode MP3, Jpeg15US 16US Hooking Up the Player Hookups Connecting the Video Cords/HDMI Cords 18US Video input jackComponent video input jacks Y, PB, PR HDMI/DVI input jack 19US To prepare for the ‘BRAVIA’ Theatre Sync featuresProgressive Auto Select this setting when Progressive Video Select this setting when 20US Connecting the Audio Cords 21US Audio L/R input jacksDigital audio input jack 22US Connecting the Power CordPlug the player and TV power cords into an AC outlet Preparing the Remote Below Release TV /1 Code numbers of controllable TVs Controlling Your TV with the Supplied RemoteControlling other TVs with Remote 23US 24US Quick Setup 13Press Enter 25US10Press X/x to select the type 11Press Enter Turn on your TV Press /1 Playing Discs26US Press a on the player, and place a disc on the disc tray Stop Press Pause Additional operationsDVD Video Operation While playing a disc, press x to stop playback Playing quickly or slowly with soundLocking the disc tray Child Lock 28US Selecting Original or Play List in DVD-VR mode Using the DVD’s MenuPress Display when the player is in stop mode Press X/x to select a setting To return to the menu 30USPlaying Video CDs With PBC Functions PBC Playback Checking the Playing Time and Remaining Time Checking the information on the front panel display Checking the play information of the disc Play Various Play Mode32US Functions Program Play Press H to start Program Play To change or cancel a programPress X/x to select SET t, then press Enter Select the title, chapter, or track you want to program 34US Playing in random order Shuffle PlayPlaying repeatedly Repeat Play Press X/x to select REPEAT, then press Enter When playing in DVD-VR modeWhen Program Play or Shuffle Play is activated Repeating a specific portion A-B Repeat Play Press Display twice during playback Adjusting the PlaybackPress X/x to select the setting you want 36US 37US Adjusting the picture items in MemorySharpening the Picture Press X/x to select AV SYNC, then press Enter Press c repeatedly to adjust the delay38US Sound AV Sync Custom Parental Control Locking Discs Custom Press X/x to select Player t, then press Enter Display for setting the playback limitation level appears40US To play a disc for which Custom Parental Control is set 41US Changing the password Watching frame by frame Slow-motion Play 42USDisc Scan, Slow-motion Play Freeze Frame When playing a Data CD/DATA DVD When playing a Video CD or Super VCD without PBC PlaybackWhen playing a Video CD or Super VCD with PBC Playback When playing a CD Press Picture Navi during playback To search for a scene using the time code DVD onlySearching by Scene 44US Playback starts from the selected scene To return to normal play during setting45US Press Audio during playback Press Audio repeatedly to select the desired audio signalChanging the Sound 46US 47US Checking the audio signal formatAbout audio signals Sound Adjustments Press SUR repeatedly to select one of the TVS sounds To cancel the setting48US Press SUR during playback MP3 audio track or Jpeg image file that the player can play Structure of disc contentsData CDs/DATA DVDs that the player can play About playback order of albums, tracks, and files 50US Playing MP3 Audio Tracks or Jpeg Image Files Selecting a Jpeg image file Selecting an albumSelecting an MP3 audio track Press X/x to select an album Press H 52USPress Menu Slide show starts with sound Viewing a slide show with sound Mode MP3, JpegPress X/x to select Auto default, and press Enter Options for Mode MP3, Jpeg appear 54US Setting the pace for a slide show IntervalPress X/x to select a setting Selecting the slides’ appearance Effect Press X/x to select an item, then press Enter Using the Setup DisplayPress X/x to select the setup item from the displayed list Press X/x to select SETUP, then press Enter 56US Press X/x to select a setting, then press Enter Jpeg Resolution Settings for the DisplayHdmi Resolution To reset the setting Background 58USYCBCR/RGB Hdmi Screen Saver Dimmer Auto Power OFFOutput Auto Play Language Follow 60USHdmi Control Downmix DVDs only Settings for the SoundSetting the digital output signal Audio DRC Dynamic Range Control DVDs only 48kHz/96kHz PCM DVD Video only 62USDolby Digital DVDs only DTS Sound TroubleshootingPower Picture 64US Operation Playback stops automatically Album/track/file names are not displayed correctlyDisc does not start playing from the beginning Player starts playing the disc automatically 66US When letters/numbers appear DisplaySelf-diagnosis Function 67US Specifications Code Language Language Code ListParental Control Area Code List 68US Numerics SymbolsIndex Usable discs Video based software 19 Video CD 7 Zoom 27 70US Reproducción Conexiones Notas Conexión del reproductor Conexiones Asegúrese de que la conector no esté al revés ni inclinada Toma de entrada de vídeoToma de entrada S Video s vídeo Tomas de entrada de vídeo componente Y, PB, PR Preparación para las funciones de ‘BRAVIA’ Theatre Sync Si lo conecta a un televisor de pantalla 43 estándar Normal Interlace normal entrelazado Uso del botón Progressive progresivoProgressive Auto progresivo automático Sugerencia Paso 2 Conexión de los cables de audio Tomas de entrada de audio I/D Tomas de entrada de audio digital Paso 4 Preparación del control remoto Paso 3 Conexión del cable de alimentación Códigos de televisores controlables Control del televisor mediante el control remoto10ES Suelte TV televisor /1 Presione X/x para seleccionar un idioma Paso 5 Ajuste rápidoEncienda el televisor Presione /1 Presione Enter ingresar sin insertar ningún disco Se selecciona DTS sistema digital de sala de cine 12ES11Presione Enter ingresar 13Presione Enter ingresar Cambie el selector de entrada del Televisor para que la señal del Reproductor aparezca en laPantalla del televisor Presione H Presione /1. El reproductor entra en modo de espera 14ESPara apagar el reproductor Reproducción Operaciones adicionales15ES Para FuncionamientoPage