Playing Discs in Various Modes
To change the password
1In Step 5, select “CHANGE PASSWORD” using >/., then press /or ENTER.
The display for changing the password appears.
2Follow Steps 4 and 5 to enter a new password.
zIf you have forgot your password
Enter 6 digits number “199703” in Step 4 to clear the current password. To enter a new password, follow the procedure from Step 4 again.
Notes
•When you play DVDs which do not have the Parental Control function, playback cannot be limited on this player.
•When you do not set a password, you cannot change the settings for playback limitation.
•Depending on the DVD, you may be asked to change the parental control level while playing the disc. In this case, enter the password, then change the level.
When you stop playing the DVD, the level returns to the original level.
Standard | Code number |
|
|
Austria | 2046 |
|
|
Belgium | 2057 |
|
|
Canada | 2079 |
|
|
China | 2092 |
|
|
Denmark | 2115 |
|
|
Finland | 2165 |
|
|
France | 2174 |
|
|
Germany | 2109 |
|
|
Hong Kong | 2219 |
|
|
Indonesia | 2238 |
|
|
Italy | 2254 |
|
|
Japan | 2276 |
|
|
Malaysia | 2363 |
|
|
Netherlands | 2376 |
|
|
Norway | 2379 |
|
|
Philippines | 2424 |
|
|
Singapore | 2501 |
|
|
Spain | 2149 |
|
|
Sweden | 2499 |
|
|
Switzerland | 2086 |
|
|
Taiwan | 2543 |
|
|
Thailand | 2528 |
|
|
United Kingdom | 2184 |
|
|
Controlling the TV or the AV receiver with the Supplied Remote Z
If you adjust the remote signal, you can control your TVs with the supplied remote. Default setting is to control Sony TVs with the gmark.
When you connect the player to a Sony AV receiver, you can also set the input of the receiver to this player with the supplied remote .
TV/DVD |
|
|
|
switch |
|
| POWER |
| 1 | 2 | 3 |
Number | 4 | 5 | 6 |
buttons | 7 | 8 | 9 |
|
| 0 |
|
Controlling TVs with the remote
1Slide TV/DVD switch to TV.
2Hold down POWER, and enter your TV’s manufacturer’s code in the table below using the number buttons. Then release POWER.
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.
Notes
•If you enter a new code number, the code number previously entered will be erased.
•When you replace the batteries of the remote commander, the code number automatically resets to 01 (Sony). Reset the appropriate code number.
