Sony DVP-S500D Getting Started, p When using an optical digital connecting cord, Amplifier with a

Getting Started

zIf you have a digital component such as an amplifier with a digital connector, DAT or MD

Connect the component via the DIGITAL OUT OPTICAL or COAXIAL connector using an optical or coaxial digital connecting cord (not supplied).

When you play a DVD, set “DIGITAL OUT” in “INITIAL SETUP 2” to “PCM” in the setup display. (page 35)

pWhen using an optical digital connecting cord

Optical digital connecting cord

(not supplied)

Take off the cap and plug in the optical digital connecting cord.

				Amplifier with a
CD/DVD player				digital connector, MD
				deck, DAT deck, etc.
	OPTICAL		COAXIAL	DIGITAL IN
				OPTICAL
		PCM/
DOLBY DIGITAL (AC-3)
DIGITAL OUT

pWhen using a coaxial digital connecting cord

Coaxial digital connecting cord

(not supplied)

CD/DVD player

OPTICAL COAXIAL

PCM/

DOLBY DIGITAL (AC-3)

DIGITAL OUT

Amplifier with a digital connector, MD deck, DAT deck, etc.

DIGITAL IN

COAXIAL

Notes

•Refer to the instructions supplied with the component to be connected.

•You cannot make digital audio recordings of discs recorded in Dolby Digital (AC-3) format directly using an MD deck or DAT deck.

When you make the connections above, do not set “DIGITAL OUT” in “INITIAL SETUP 2” to “DOLBY DIGITAL/PCM.” If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the speakers to be damaged.

8EN