Basic Operations
Notes
•Depending on the DVD, you may not be able to do some of the operations described on the right.
•When you play back a DVD at twice the normal speed in either direction, the sounds of the picture will come out from the LINE OUT (AUDIO 1, 2) connectors. The sounds are lower than the ones at normal speed. In this case, no sounds come out from the DIGITAL OUT OPTICAL and COAXIAL connectors. But there is no sound when you set “MODE” in “5.1 OUTPUT SETUP” to “VES A” or “VES B” (page 40).
Notes
•The JOG indicator shows the mode of the click shuttle close to the indicator only. When the indicator on the remote does not light up, it keeps shuttle mode on the remote even if the indicator on the player lights up.
•If you don‘t operate the click shuttle for about 20 seconds after pressing JOG, it returns to shuttle mode on the remote. On the player, it keeps jog mode.
To play at various speeds/frame-by-frame
Using the click shuttle and the JOG button/indicator, you can playback a DVD with various speed or
JOG
JOG
Click shuttle
Click shuttle
pTo change the playback speed (Shuttle mode)
Turn the click shuttle. The playback speed changes depending on the turning direction and angle as follows:
FF2)(about 30 times the normal speed)
<
FF1)(about 10 times the normal speed)
<
×2Ó(about twice the normal speed)
<
PLAY( (Normal speed)
<
SLOW1 
(playback direction)
<
SLOW2 | (playback direction |
< | – slower than “SLOW1 ”) |
PAUSEP
<
SLOW2 
(opposite direction
<– slower than “SLOW1 
”)
SLOW1 
(opposite direction)
×2Ò(about twice the normal speed : opposite direction)
FR10(about 10 times the normal speed)
FR20(about 30 times the normal speed)
If you turn the click shuttle quickly, the playback speed goes to FF2)/FR20 at once.
pTo play the DVDs
1Press JOG.
JOG lights up during jog mode. When you press JOG on the player, it becomes pause.
2Turn the click shuttle.
Depending on the turning speed, the playback goes to
pTo return to Continuous Play
Press á.
