Sony DVP-S7000 8

Getting Started

zIf you have a digital component such as an amplifier with a digital connector, DAT or MD

Connect the component via the DIGITAL OUT OPTICAL or COAXIAL connector using an optical or coaxial cable (not supplied).

When you play a DVD, set “DVD DIGITAL OUT” in “INITIAL SETUP” to “PCM” in the menu. (page 47) When you play a VIDEO CD, set “VIDEO CD DIGITAL OUT” in “INITIAL SETUP” to “ON” in the menu. (page 47)

When using an optical cable

Optical cable

(not supplied)

Take off the cap and plug in the optical cable.

		Amplifier with a
CD/DVD player		digital connector, MD
CD/DVD player		deck, DAT deck, etc.
	DIGITAL OUT	DIGITAL IN
OPTICAL COAXIAL		DIGITAL IN
OPTICAL COAXIAL

OPTICAL

PCM/ AC-3 DIGITAL

When using a coaxial cable

Coaxial cable (not supplied)

		Amplifier with a
CD/DVD player		digital connector, MD
CD/DVD player		deck, DAT deck, etc.
	DIGITAL OUT	DIGITAL IN
OPTICAL COAXIAL		DIGITAL IN
OPTICAL COAXIAL

COAXIAL

PCM/ AC-3 DIGITAL

Notes

•Refer to the instructions supplied with the component to be connected.

•You cannot make digital audio recordings of discs recorded in Dolby Digital (AC-3) format directly using an MD deck or DAT deck.

When you make the connections above, do not set “DVD DIGITAL OUT” in “INITIAL SETUP” to “AC-3 Digital.” If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the speakers to be damaged.

zIf you have a digital component with a built-in Dolby Digital decoder

Connect the component via the DIGITAL OUT OPTICAL or COAXIAL connector using an optical or coaxial cable (not supplied). When the component with a built-in Dolby Digital decoder is connected, the player plays DVDs with sound recorded in Dolby Digital (AC-3) format while producing the effect of being in a movie theater or a concert hall.

In the menu, set “DVD DIGITAL OUT” in “INITIAL SETUP” to “AC-3 Digital.” (page 47)