8GB
D:\Cmeng's JOB\SONY TV\SY0331_V2 (Rev-3)\4268265141_GB\GB03STU.fm
KDL-EX723/EX720/EX523/EX520/EX423/EX420/CX523/CX520
4-268-265-14(1)
For KDL-60EX720
1Align with the two dowels of the Table-
Top Stand, and gently place the TV,
checking the f mark is facing the front.
2Attach the TV and Table-Top Stand with
the supplied screw and hexagon wrench.
~
Set the torque setting to approximately 3 N·m {30
kgf·cm}.

Detaching the Table-Top Stand

from the TV

To detach the Table-Top Stand from the TV,
remove the screws fixed in step 3. For
KDL-60EX720, be sure to remove the screws
for detaching the head when the Table-Top
Stand is not attached to the TV.
~
Do not remove the Table-Top Stand for any reason
other than to install corresponding accessories on
the TV.
When removing the Table-Top Stand from the TV,
lay the display face down on a stable work surface
that is larger than the TV.
To prevent damaging the surface of the LCD
display, make sure to place a soft cloth on the work
surface.

2: Adjusting the viewing

angle of the TV

This TV can be adjusted within the angles as
illustrated.
Angle adjustment (Swivel)
(except KDL-60EX720/
KDL-26/22EX42x)
~
When adjusting the angle, hold the stand with one
hand to avoid having the stand slip or TV tip over.
BExcept KDL-32EX420 (Australia model)
BKDL-32EX420 (Australia model)
Neck
*
Head
* 3 N·m {30 kgf·cm}
20°
20°
20°
20°
15°
15°
15°
15°