MIB to Be Installed | Sony FWD-S47H1 specs

5. MIB to Be Installed

This unit installs MIB-2.

MIB-2 is the most representative standard MIB. It is installed in various network products.

The statistical information on the amount of network traffic or the number of transmitted and received packets is defined, and the change or transition can be monitored by polling the information periodically. Additionally, the management items to be installed can be defined using a TCP/IP device so as to get the information effective for the monitoring of the network communication state.

Refer to RFC1213 for the detailed definition of MIB-2.

6. Information to Be Notified on Trap

In software version 2.0 or later, the software have a function that transmits error information to this unit. The error trap and authentication trap are installed.

FWD-S42H1

Page 33

Image 33

Sony FWD-S47H1 manual MIB to Be Installed, Information to Be Notified on Trap

Contents

FWD-S47H1/S42H1 Table of Contents Pin Assignment Communication ParametersCommunication Data Format Control message Enquiry message Enquiry answer Command cancelAnswer message Control answer Mode Control Error answerGeneral Function Code -a Ntsc PAP Dhcp Bit2 Reserved Bit3 Analog Signal Detect Function Code -dInput Select Priority Signal Select Function Time ControlData Set Month, Date Clock Set Hour, Minute Year SetClock Set Week Answer Header Return to Data Size Return Data1 Check Sum Code -e On Timer, Off TimerCode -f Week Select IP Address Setting Picture/Sound Player IP AddressPicture/Sound 0x0C Dynamic Picture 0x00 Color Temp Code -bCode -c 8Bits Register Size/Shift Auto FWD-S42H1 Answer Header Return to Data Size Data2 Data3 Check Sum Power On Batch Model Name Status EnquirySerial Number Operation Time When the display value is 20 dC, 0xECis re- turned When the display value is 3.0 V,0x1E30 is returnedSoft Version Main CPU/LAN Code -k Shutdown Log Clear Shutdown LogLAN Firmware Version Data1 Data2 Check Sum Return Data11 Check Sum Auto Input DetectInput Option Type Input Type Option Control Enquiry Standby Power On AFunction BRange/Switch codeAuto Panel Type Detect Code -h Code Table Code -j Auto Plug Detect User Reset Snmp Installation Specifications of Snmp InstallationOperation of Snmp Setting Window Snmp Setting window on Web Community Setting procedure of CommunityRights Trap destinations IP Restriction of Host Authentication TrapEditing of Community Removal of Community Information to Be Notified on Trap MIB to Be Installed Description Default Setting Packet Structure Setting ItemsHeader Version Command RequestResponse Requests Requests and ResponsesResponses SET request Items Error response F100h Error Codes Item errorsCommunity error Network error Request errorsComm error Nvram error