2. Specifications of SNMP Installation
The specifications of the SNMP agent installed in this unit are shown in below.
. SNMP version: | SNMPv1 |
. MIB definition: | SMIv2 |
. Support PDU: | GetRequesat |
| SetRequest |
| GetNextRequest |
| Trap |
.Standard MIB to be installed:
3. Installation
The setting below is required to use the SNMP function of this unit. (Set according to your network environment and SNMP management environment.)
.Community and its Community property
.Authentication trap
.Host restriction
The Web server function of this unit is used for setting. Refer to the Operation Manual of this unit for the operation of the Web server.
The contents of each item and the setting of SNMP are fully described in this specification.
4. Operation of SNMP Setting Window
This section describes the procedure and contents for setting of SNMP.
Open the Web page of this unit and click the [SNMP] button in the Advanced setting item on the Setup page (where an administrator’s password is necessary). The SNMP setting window is displayed.
SNMP Setting window (on Web Page)
28 |
|
