Sony headphone USING WITH SONY ERICSSON Z600, a.ACTIVATING THE BLUETOOTH, Quick Access, Select

USING WITH SONY ERICSSON Z600

a.ACTIVATING THE BLUETOOTH

You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices.

1.Press Menu Key . Scroll to Connectivity, SELECT. Bluetooth, SELECT. Choose Turn ON, SELECT.

2.Continue pressing to exit.

QUICK ACCESS:

a.Press More key.

b.Scroll to Turn On Blue tooth, SELECT.

c.Continue pressing to exit.

b.SETTING TO LOW POWER MODE

1.Press Menu Key . Scroll to Connectivity, SELECT. Bluetooth, SELECT.

2.Scroll to Handsfree, SELECT. Choose Car handsfree, SELECT.

3.Choose Power Save, SELECT.

4.Continue pressing to exit.

c.PAIRING TO THE CELLULAR PHONE

1.Bring the cellular phone at about 20 cm from the Car Kit.

2.From the ON state, press the multi-function button for 10 seconds or until a distinctive three-tone sound will be heard and at the same time, the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue. This indicates that the unit is now ready for pairing.

3.Press Menu Key . Scroll to Connectivity, SELECT. Bluetooth, SELECT.

4.Scroll to My Devices, SELECT. New Device, ADD. The phone will then search the device to be added. After the device is found, press SELECT.

5.Enter “0000” as the passkey and press OK. If the pairing is successful, the alternating red/blue lights will stop. If pairing is unsuccessful, the steps above may be repeated.

6.Continue pressing to exit.

The unit is now ready to link calls from the phone directly to the Car Kit. An icon, will appear during the standby mode indicating that the Car Kit is linked with the phone.

d.ANSWERING/RECEIVING A CALL

When the phone is receiving a call, a ring tone will be heard on the Car Kit.

1.Just press the multi-function button down once to answer the call. Pressing the button again will hang-up and terminate the call.

2.If you wish to answer a call on the cellular phone, just press YES and the call is automatically transferred to the phone. To transfer the call to the Car Kit, Press Menu Key. Scroll to Transfer Sound and press SELECT. Choose the paired device and press

SELECT.

3.To terminate the call, press the multi-function button again. e. MAKING A CALL with the Car Kit on

Normal dialing

1.Enter the contact number and send. Audio can be heard on the Car Kit simultaneously.

2.Press the multi-function button to hang-up and terminate the call.

Voice dialing

Refer to step g and h for the procedure when activating and recording for voice dialing.

1.Press the multi-function button once to activate the voice dialing.

16