Sony headphone manual USING WITH MOTOROLA E398, h.RECORDING FOR VOICE DIALING

h.RECORDING FOR VOICE DIALING

Note: Voice dialing entries must be stored in the phone’s memory (not on the SIM card!).

1.Press to access Main Menu. Scroll to Settings and press Select. Choose Voice control, Select. Voice dialing, Select. Edit names, Select. New voice, Add. (Contacts list will appear).

2.Choose among the contacts whichever you want to have a voice name/voice tag. When it’s highlighted, press Select.

3.Follow the instructions that will be displayed on screen.

Note: You may use any word(s) or just say the person’s name for a voice tag.

4.When your spoken word(s) is caught up by the phone, it will ask you to listen to your recording and will ask the question, “Is it ok?”.

5.As soon as you press Yes as reply, your voice command will be saved. Under Voice

Commands tab, a callout icon will appear next to a contact name which has a voice command.

6.Continue pressing to exit.

Note: Noisy environment may affect voice recognition. Record a voice and make a voice dial in a quiet environment.

USING WITH MOTOROLA E398

a.ACTIVATING THE BLUETOOTH

You must activate the Bluetooth feature of your mobile phone to establish a Bluetooth connection between your mobile phone and other Bluetooth devices.

1.Press or to access Main Menu.

2.Scroll to Settings, SELECT. Scroll to Connection, SELECT. Bluetooth Link,

SELECT.

Set-up,SELECT. Scroll to Power: Off. Press CHANGE. Choose On, SELECT.

3.Continue pressing BACK to exit.

b.PAIRING TO THE CELLULAR PHONE

1.Bring the cellular phone at about 20 cm from the Car Kit.

2.From the ON state, press the multi-function button for 10 seconds or until a distinctive three-tone sound will be heard and at the same time, the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue. This indicates that the unit is now ready for pairing.

3.Press or to access Menu. Scroll to Settings, SELECT. Choose Connection, SELECT. Bluetooth Link, SELECT.

4.Choose Handsfree, SELECT. [Look for devices], SELECT. The phone will then scan devices until it displays them in the list.

5.Under scan results, choose the device you want to pair with your mobile phone and press SELECT. A question “Bond With (device name)?” appears. Press YES.

6.Enter Bluetooth Passkey “0000” then press ok. If pairing is successful, a remark “Connected…” appears. The phone exits automatically.

The Car kit is now linked or paired with the phone. If pairing is unsuccessful, the steps above may be repeated.

c.ANSWERING/RECEIVING A CALL

When the phone is receiving a call, ring tone will be heard on the phone and on the Car Kit.

1.Shortly press the multi-function button once to answer the call.

2.To terminate the call, do the same; shortly press the multi-function button once.

19