Sony headphone Quick Access, Connect, Blue tooth, Options, Operation mode, Paired, Phone, Headset

QUICK ACCESS:

Press Menu followed by the sequence of numbers below.

	Connect	Blue tooth	Options	Operation mode
T68	8	3	-	2
T68i	8	4 (or 3 for T68i R7)	4	1

b.PAIRING TO THE CELLULAR PHONE

1.Bring the cellular phone at about 20 cm from the Car Kit.

2.From the ON state, press the multi-function button for 10 seconds or until a distinctive three-tone sound will be heard and at the same time, the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue. This indicates that the unit is now ready for pairing.

3.For T68 and T68i older versions, R6 and below, press the multi-function button once again for a short time, to access headset pairing mode.

4.Go to Menu by pressing the joystick. Scroll to Connect, YES. Select Bluetooth, YES.

5.Select Paired devices, YES. Add device, YES. Choose Phone initiates, YES. Choose Headset/Handsfree, YES. The phone will then search the device to be added. After the device is found, press YES.

QUICK ACCESS (for steps 4 and 5):

Press Menu then follow the sequence of numbers below:

	Connect	Blue tooth	Paired	Add	Phone	Headset/
			devices	device	initiates	Handsfree
T68	8	3	2	Yes	1	2
T68i	8	4 (or 3 for T68i R7)	2	Yes	1	2

6.Enter “0000” as the passkey. If pairing is successful, the alternating red/blue lights will stop. Press YES to confirm the name of the device. If pairing is unsuccessful, the steps above may be repeated.

7.Continue pressing NO to exit from menu.

The unit is now ready to link calls from the phone directly to the Car Kit. An icon, will appear during the standby mode indicating that the Car Kit is linked with the phone.

c.ANSWERING/RECEIVING A CALL

When the phone is receiving a call, a ring tone will be heard on the Car Kit.

1.Just press the multi-function button once to answer the call. Pressing the button again will hang-up and terminate the call.

2.If you wish to answer the call on the cellular phone, just press YES and the call will be heard on the phone. Pressing the multi-function button will transfer the call to the Car Kit.

3.To terminate the call, press the multi-function button again. d. MAKING A CALL with the Car Kit on

Normal dialing

1.Enter the contact number and press YES. Audio will be heard on the Car Kit. Simultaneously, a question “Retrieve call in phone?” will be displayed. Ignoring or pressing No, will retain the audio to the Car Kit. Pressing Yes, will transfer the audio to the cell phone.

2.Press the multi-function button to terminate the call.

Voice dialing

Refer to step g and h for the procedure when activating and recording for voice dialing.

1.Press the multi-function button once to activate the voice dialing.

9