Sony headphone USING WITH SONY ERICSSON T610, a.ACTIVATING THE BLUETOOTH, Select, Normal dialing

USING WITH SONY ERICSSON T610

a.ACTIVATING THE BLUETOOTH

You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone and other Bluetooth devices.

1.Go to Menu by pressing the joystick. Scroll to Connectivity, SELECT. Select Bluetooth, SELECT. Turn On, SELECT.

2.Continue pressing to exit. b. PAIRING TO THE CELLULAR PHONE

1.Bring the cellular phone at about 20 cm from the Car Kit.

2.From the ON state, press the multi-function button for 10 seconds or until a distinctive three-tone sound will be heard and at the same time, the Bluetooth indicator LED changes from blinking blue to alternate blinking of red and blue. This indicates that the unit is now ready for pairing.

3.Go to Menu by pressing the joystick. Scroll to Connectivity, SELECT. Select Bluetooth,

SELECT.

4.Scroll to My devices, SELECT. New device, ADD. The phone is now searching for pairable devices to be added. Select the device you want to pair with your cell phone. Press SELECT.

5.Enter “0000” as the passkey then press OK. If the pairing is successful, the alternating red/blue lights will stop.

6.Continue pressing to exit.

The unit is now ready to link calls from the phone directly to the Car Kit. An icon will appear during the standby mode indicating that the Car Kit is linked with the phone.

c.ANSWERING/RECEIVING A CALL

When the phone is receiving a call, a ring tone will be heard on the Car Kit.

1.Just press the multi-function button down once to answer the call. Pressing the button again will hang-up and terminate the call.

2.If you wish to answer a call on the cellular phone, just press YES and the call is automatically transferred to the phone. Pressing the multi-function button transfers the call on the Car Kit.

3.To terminate the call, press the multi-function button again. d. MAKING A CALL with the Car Kit on

Normal dialing

1.Enter the contact number and press CALL button. Audio is automatically transferred to the Car Kit.

2.Press the multi-function button to hang-up and terminate the call.

Voice dialing

Refer to step g and h for the procedure when activating and recording for voice dialing.

1.Press the multi-function button once to activate the voice dialing.

2.A beep will then be heard on the Car Kit prompting the user to say the name of the person to call.

3.Say the name. The name will be played back to you. The phone will then place the call automatically. In case the cell phone does not recognize the name spoken, the steps above may be repeated.

4.Press the multi-function button again to terminate the call.

Redialing

Press quickly the multi-function button twice to redial the last number.

13