Pioneer AVH-P4100DVD Audio Adjustments, Using subwoofer output, Adjusting loudness

	Section
Audio Adjustments	13

Custom Custom

Flat Flat

Super Bass Super bass

#Custom is an adjusted equalizer curve that you create. If you make adjustments to an equali- zer curve, the equalizer curve setting is memor- ized in Custom.

#When Flat is selected, no supplement or cor- rection is made to the sound. This is useful to check the effect of the equalizer curves by switch- ing alternatively between Flat and a set equalizer curve.

3Touch c or d on Band to select the equalizer band to adjust.

Low (low)—Mid (mid)—High (high)

4Touch c or d on Frequency to select the frequency to adjust.

Low: 40Hz—80Hz—100Hz—160Hz

Mid: 200Hz—500Hz—1kHz—2kHz

High: 3.15kHz—8kHz—10kHz—12.5kHz

5Touch c or d on Q.Factor to select the Q factor. 2Wide—1Wide—1Narrow—2Narrow

6Touch a or b to adjust the level of the equalizer band.

+12 to –12 is displayed as the level is in-

creased or decreased.

# You can then select another band and adjust the level.

Using subwoofer output

This unit is equipped with a subwoofer output which can be turned on or off.

!When the subwoofer output is on, you can adjust the cut-off frequency and the output level of the subwoofer.

1Touch Subwoofer on the audio function menu.

2Touch dnext to Subwoofer to turn sub-

woofer output on.

# To turn subwoofer output off, touch c.

3Touch c or d next to Phase to select the phase of subwoofer output.

Touch d to select normal phase and Normal appears in the display. Touch c to select re- verse phase and Reverse appears in the dis- play.

4Touch c or d next to Level to adjust the output level of the subwoofer.

+6 to –24 is displayed as the level is increased or decreased.

5Touch c or d next to Frequency to se- lect cut-off frequency.

Each time you touch cor d selects cut-off fre- quencies in the following order: 50Hz—63Hz—80Hz—100Hz—125Hz

Only frequencies lower than those in the se-

lected range are outputted from the sub- woofer.

Audio Adjustments

Adjusting loudness

Loudness compensates for deficiencies in the low- and high-sound ranges at low volume.

1Touch Loudness on the audio function menu.

2Touch d to turn loudness on.

#To turn loudness off, touch c.

3Touch c or d to select a desired level. Low (low)—Mid (mid)—High (high)

Boosting the bass

Bass boost function boosts the bass level of sound.

1Touch Bass Booster on the audio func- tion menu.

2Touch c or d to select a desired level.

0to +6 is displayed as the level is increased or decreased.

En 43