Pioneer AVH-P4100DVD Available accessories Digital Signal Processor, Using the position selector

Section
19		Available accessories
	Digital Signal Processor		# When playing discs recorded with more than
	Introduction of DSP adjustments		96 kHz sampling frequency, audio is outputted
			from front speakers only.
			# When selecting FM as the source, you cannot
			switch to Source Level Adjuster.
			# When playing other than the DVD disc, you
			cannot switch to Dynamic Range Control.
			# When neither Front-L nor Front-R is selected
			in Position, you cannot switch to
			Time Alignment.
			# When both the center speaker and the rear
	1		speaker are set to OFF in the speaker setting, you
			cannot switch to Dolby Pro Logic II.
	You can use this unit to control multi-channel		2 Touch ESC to return to the ordinary dis-
	processor (DEQ-P8000), which is sold sepa-		play.
	rately.		# To return to the previous display, touch Back.

1DSP display

	Shows the DSP function names.	Using the position selector
By carrying out the following settings/adjust-		One way to assure a more natural sound is to
		accurately position the stereo image, putting
ments in the order shown, you can create a fi-
		you right in the center of the sound field. The
nely-tuned sound field effortlessly.
		position selector function lets you automati-
1	Setting the speaker setting
		cally adjust the speaker output levels and in-
2	Using the position selector
		serts a delay time to match the number and
3	Auto TA and EQ (auto-time alignment and auto-
		position of occupied seats. When used in con-
	equalizing)
		junction with the SFC, the feature will make
4	Adjusting the time alignment
		the sound image more natural and offer a pa-
5	Adjusting the speaker output levels using a
		noramic sound that envelops you.
	test tone
6	Selecting a cross-over frequency	1 Touch Position on the DSP function
7	Adjusting the speaker output levels
		menu.

8Adjusting 3-band parametric equalizer

1 Touch AV Menu and then touch	2 Touch c/d/a/b to select a listening po-
	sition.
DSP Menu to display the DSP function
	Touch one of these, c/d/a/b, to select a lis-
names.	tening position as listed in the table.
The DSP function names are displayed and
operable ones are highlighted.	Key	Display	Position
# To go to the next group of function names,	c	Front-L	Front seat left
touch b.
	d	Front-R	Front seat right
# To return to the previous group of function
names, touch a.	a	Front	Front seats
# When playing discs recorded with more than
	b	All	All seats
96 kHz sampling frequency, you cannot use audio
functions. Also, equalizer curve setting, Position,	# To cancel the selected listening position,
Auto EQ and Auto TA will be canceled.	touch the same key again.

82 En