!LPCM:No
!Bitrate: 8 kbps to 320 kbps (CBR), VBR
!Samplingfrequency: 8 kHz to 48 kHz
!Compatibleexternal subtitle file extension:
.srt
Using the display correctly
CAUTION
!Ifliquid or foreign matter should get inside
thisunit, turn off the power immediately and
consultyour dealer or the nearest authorized
PIONEERService Station. Do not use the unit
inthis condition because doing so may result
infire, electric shock, or other failure.
!Ifyou notice smoke, a strange noise or smell,
orany other abnormal signs from the display,
turnoff the power immediately and consult
yourdealer or the nearest authorized
PIONEERService Station. Using this unit in
thiscondition may result in permanent da-
mageto the system.
!Donot disassemble or modify this unit, as
thereare high-voltage components inside
whichmay cause electric shock. Be sure to
consultyour dealer or the nearest authorized
PIONEERService Station for internal inspec-
tion,adjustments, or repairs.

Handling the display

!Donot allow direct sunlight to fall on the
displaywhen this unit is not being used.
Extendedexposure to direct sunlight can
resultin LCD screen malfunction due to
theresulting high temperatures.
!Nevertouch the screen with anything be-
sidesyour finger whenoperating the touch
panelfunction. The screen can scratch ea-
sily.
!Whenthe display is subjected to direct sun-
lightfor a long period of time, it will be-
comevery hot resulting in possible
damageto the LCD screen. You should
avoidexposing the display unit to direct
sunlightas much as possible.
!Thedisplay should be used within the tem-
peratureranges shown below.
Storagetemperature range: -20 °C to +80
°C
Attemperatures higher or lower than the
operatingtemperature range, the display
maynot operate normally.
!TheLCD screen is exposed in order to in-
creaseits visibility within the vehicle.
Pleasedo not press strongly on it as this
maydamage it.
!Donot place anything on the display when
itis opened. Also, do not attempt to carry
outangle adjustment, or open/close the
displayby hand. Applying strong force to
thedisplay may damage it.
!Donot push the LCD screen forcefully as
thismay scratch it.
!Becareful not to place anything between
thedisplay and the main body when the
displayis opening or closing. If an object
getsbetween the display and main body,
thedisplay may stop working.
Additional Information
En
104
Appendix