Sony HMD-A400 Adjusting the centering of the picture (CENTER), Adjusting the size of the picture (SIZE), Enlarging or reducing the picture (ZOOM), Adjusting the convergence

Adjusting the centering of the picture (CENTER)

This setting is stored in memory for the current input signal.

1Press the center of the control button.

The main MENU appears on the screen.

2Move the control button m/M to highlight SIZE/CENTER and press the center of the control button again.

The SIZE/CENTER menu appears on the screen.

3First move the control button m/M to select (H-CENTER) for horizontal adjustment, or

(V-CENTER) for vertical adjustment. Then move the control button </, to adjust the centering.

Adjusting the size of the picture (SIZE)

This setting is stored in memory for the current input signal.

1Press the center of the control button.

The main MENU appears on the screen.

2Move the control button m/M to highlight SIZE/

CENTER and press the center of the control button again.

The SIZE/CENTER menu appears on the screen.

3First move the control button m/M to select

(H-SIZE) for horizontal adjustment, or

(V-SIZE) for vertical adjustment. Then move the control button </, to adjust the size.

Enlarging or reducing the picture (ZOOM)

This setting is stored in memory for the current input signal.

1Press the center of the control button.

The main MENU appears on the screen.

2Move the control button m/M to highlight SIZE/

CENTER and press the center of the control button again.

The SIZE/CENTER menu appears on the screen.

3Move the control button m/M to select (ZOOM), and move </, to enlarge or reduce the picture.

Adjusting the shape of the picture (GEOMETRY)

The GEOMETRY settings allow you to adjust the rotation and shape of the picture.

The (ROTATION) setting is stored in memory for all input signals. All other settings are stored in memory for the current input signal.

1Press the center of the control button.

The main MENU appears on the screen.

2Move the control button m/M to highlight

GEOMETRY and press the center of the control button again.

The GEOMETRY menu appears on the screen.

3First move the control button m/M to select the desired adjustment item. Then move the control button </, to make the adjustment.

Select	To
(ROTATION)	rotate the picture
(PIN)	expand or contract the picture sides
(PIN BALANCE)	shift the picture sides to the left or
	right
(KEY)	adjust the picture width at the top of
	the screen
(KEY BALANCE)	shift the picture to the left or right at
	the top of the screen

Adjusting the convergence

(CONVERGENCE)

The CONVERGENCE settings allow you to adjust the quality of the picture by controlling the convergence. The convergence refers to the alignment of the red, green, and blue color signals. If you see red or blue shadows around letters or lines, adjust the convergence.

These settings are stored in memory for all input signals.

1Press the center of the control button.

The main MENU appears on the screen.

2Move the control button m/M to highlight

CONVERGENCE and press the control button again.

The CONVERGENCE menu appears on the screen.

3First move the control button m/M to select the desired adjustment item. Then move the control button </, to make the adjustment.

SelectTo

horizontally shift red or blue shadows

vertically shift red or blue shadows

10