Sony HMD-A400 Selecting the on-screenmenu language (LANGUAGE, INFORMATION), Connecting Universal Serial Bus (USB) compliant peripherals, Notes, •ENGLISH, • : Russian

Connecting Universal Serial Bus (USB) compliant peripherals

Your monitor has one upstream USB connector (on the rear panel) and four downstream USB connectors (two on both the left and right sides). They provide a fast and easy way to connect USB compliant peripheral devices (such as keyboards, mice, printers and scanners) to your computer using a standardized USB cable. To use your monitor as a hub for your peripheral devices, connect the USBs as illustrated below.

to USB compliant	to a USB compliant	to USB compliant
peripheral devices	computer	peripheral devices

1Turn on the monitor and computer.

2Connect your computer to the square upstream connector using the supplied USB cable.

For customers using Windows

If a message appears on your screen, follow the on-screen instructions and select Generic USB Hub as the default setting.

3Connect your USB compliant peripheral devices tothe rectangular downstream USB connectors.Notes

•Not all computers and/or operating systems support USB configurations. Check your computer’s instruction manual to see if you can connect USB devices.

•In most cases, USB driver software needs to be installed on the host computer. Refer to the peripheral device’s instruction manual for further details.

•The monitor functions as a USB hub as long as the monitor is either “on” or in power saving mode.

•If you connect a keyboard or mouse to the USB connectors and then boot your computer for the first time, the peripheral devices may not function. First connect the keyboard and mouse directly to the computer and set up the USB compliant devices. Then connect them to this monitor.

•Do not lean on the monitor when plugging in the USB cables. The monitor may suddenly shift and cause injury.

Selecting the on-screen menu language (LANGUAGE/

INFORMATION)

English, French, German, Italian, Spanish, Dutch, Swedish, Russian and Japanese versions of the on-screen menus are available. The default setting is English.

1Press the center of the control button.See page 9 for more information on using the control button.

EX I T

P I CTURE E F F ECT

S I Z E / CENT ER

GEOME TRY

CONVERGENCE

SCREEN

COLOR

L ANGUAGE / I NFORMA T I ON

RESE T

SE L ECT

2Move the control button m/M to highlight LANGUAGE/INFORMATION and press the center of the control button again.

LANGUAGE / I NFORMAT I ON

ENGL I SH	FRANÇ A I S
DEUT SCH	I T A L I ANO
ESPAÑ OL	NEDER L ANDS
SVENSKA
SE L ECT	EX I T

3 Move the control button m/Mto select . Then move the control button </, to select a language.

•ENGLISH•FRANÇ AIS: French•DEUTSCH: German•ITALIANO: Italian•ESPAÑ OL: Spanish•NEDERLANDS: Dutch•SVENSKA: Swedish• : Russian• : JapaneseTo close the menu

Press the center of the control button once to return to the main MENU, and twice to return to normal viewing. If no buttons are pressed, the menu closes automatically after about 30 seconds.

To reset to English

See “Resetting the adjustments (RESET)” on page 11.