Adjusting the color of the picture (COLOR)

The COLOR settings allow you to adjust the picture’s color temperature by changing the color level of the white color field. Colors appear reddish if the temperature is low, and bluish if the temperature is high. This adjustment is useful for matching the monitor’s colors to a printed picture’s colors.

This setting is stored in memory for all input signals.

1Press the center of the control button.

The main MENU appears on the screen.

2Move the control button m/Mto highlight COLOR and press the center of the control button again.

The COLOR menu appears on the screen.3Move the control button </, to select a color temperature.

The preset color temperatures are 5000K, 6500K, and 9300K. Since the default setting is 9300K, the whites will change from a bluish hue to a reddish hue as the temperature is lowered to 6500K and 5000K.

4If necessary, fine tune the color temperature.

First move the control button </, to select USER. Then move the control button m/M to select R (red), G (green), or B (blue) and move the control button </, to make the adjustment.

COLOR

 

USER

5000K 6500K

9300K

R

 

 

 

 

5 0

G

 

 

 

5 0

B

 

 

5 0

SE L ECT EX I T

If you fine tune the color temperature, the new color settings are stored in memory and recalled whenever you select USER.

Additional settings (SCREEN)

You can manually degauss (demagnetize) the screen, and adjust the moire cancellation level.

1Press the center of the control button.

The main MENU appears on the screen.

2Move the control button m/M to highlight

SCREEN and press the center of the control button again.The SCREEN menu appears on the screen.3Move the control button m/M to select the desired adjustment item.Adjust the selected item according to the following instructions.

xDegaussing the screen

The monitor is automatically demagnetized when the power is turned on.

To manually degauss the monitor, first move the control button m/Mto select (DEGAUSS). Then move the control button ,.

The screen is degaussed for about 5 seconds. If a second degauss cycle is needed, allow a minimum interval of 20 minutes for the best result.

xAdjusting the moire*

If elliptical or wavy patterns appear on the screen, adjust the moire cancellation level.

To adjust the amount of moire cancellation, first move

the control button m/M to select (CANCEL MOIRE). Then move the control button </, until the moire effect is at a minimum.

*Moire is a type of natural interference which produces soft, wavy lines on your screen. It may appear due to interference between the pattern of the picture on the screen and the phosphor pitch pattern of the monitor.

Example of moire

US

Resetting the adjustments (RESET)

This monitor has the following two reset methods. Use the RESET menu to reset the adjustments.

1Press the center of the control button.

The main MENU appears on the screen.

2Move the control button m/M to highlight 0 RESET and press the center fo the control button again.

The RESET menu appears on the screen.Reset the settings according to the following instructions.Resetting all of the adjustment data for the current input signal (MODE)Move the control button <.

The MODE item is selected. All of the adjustment data for the current input signal is reset.

Note that the following items are not reset by this method.on-screen menu language (page 7)picture’s rotation (page 10)Resetting all of the adjustment data to factory preset levels (ALL)Move the control button ,.

The ALL item is selected. All of the adjustment data for the current input signal is reset. All of the adjustment data (except for the USER settings in the COLOR menu) is reset to the factory preset levels.

Note

The monitors buttons will not operate for about 5 seconds when ALL is selected.

11