Identifying parts and controls
See the pages in parentheses for further details.
| Front | Rear |
MENU
The control button is used to display the menu and make adjustments to the monitor, including brightness and contrast adjustments.
2! (power) switch and indicator (pages 6, 12, 15)This button turns the monitor on and off. The power indicator lights up in green when the monitor is turned on, and either flashes in green and orange, or lights up in orange when the monitor is in power saving mode.
3AC IN connector (page 6)This connector provides AC power to the monitor.
This connector inputs RGB video signals (0.700
|
| 1 | 2 | 3 | 4 | 5 |
|
| 6 | 7 | 8 | 9 | 10 |
|
|
|
| 11 12 13 14 15 | US | ||||
| Pin No. | Signal |
|
|
|
|
|
|
1 | Red |
|
|
|
|
|
|
2 | Green |
|
|
|
|
|
|
3 | Blue |
|
|
|
|
|
|
4 | ID (Ground) |
|
|
|
|
| |
5 | DDC Ground* |
|
|
|
| ||
6 | Red Ground |
|
|
|
|
| |
7 | Green Ground |
|
|
|
| ||
8 | Blue Ground |
|
|
|
|
| |
9 | DDC + 5V* |
|
|
|
|
| |
10 | Ground |
|
|
|
|
|
|
11 | ID (Ground) |
|
|
|
|
| |
12 |
| ||||||
13 | H. Sync |
|
|
|
|
|
|
14 | V. Sync |
|
|
|
|
|
|
15 | Data Clock (SCL)* |
|
|
| |||
* DDC (Display Data Channel) is a standard of VESA.
5USB (universal serial bus) downstream connectors (page 7)Use these connectors to link USB peripheral devices to the monitor.
6USB (universal serial bus) upstream connector (page 7)Use this connector to link the monitor to a USB compliant computer.
5