About This Manual

•The instructions in this manual are for model HT-DDW890. In this manual, models of area code CEL is used for illustration purposes unless stated otherwise. Any difference in operation is clearly indicated in the text, for example, “Models of area code CEL only”.

The HT-DDW890 consists of:

• Receiver

STR-K890

• Speaker system

 

– Front speakers

SS-MSP890

– Center speaker

SS-CNP890

– Surround/surround back speakers

SS-SRP890

– Sub woofer

SA-WP890

•The instructions in this manual describe the controls on the supplied remote. You can also use the controls on the receiver if they have the same or similar names as those on the remote.

About area codes

The area code of the receiver you purchased is shown on the lower right portion of the rear panel (see the illustration below).

SURROUND BACK

L

R

SURROUND CENTER

Area code

Any differences in operation, according to the area code, are clearly indicated in the text, for example, “Models of area code AA only”.

This receiver incorporates Dolby* Digital and Pro Logic Surround and the DTS** Digital Surround System.

*Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, “Surround EX”, and the double-D symbol are trademarks of Dolby Laboratories.

**“DTS” and “DTS-ES Neo:6” are registered trademarks of DTS, Inc. “96/24” is a trademark of DTS, Inc.

This receiver incorporates High-Definition Multimedia Interface (HDMITM) technology. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

Note for the supplied remote

(RM-AAP017)

The AUX button on the remote is not available for receiver operation.

3GB