Sony HT-DDW890 Switching between digital and analog audio, Enjoying the DIGITAL MEDIA PORT, (DMPORT), (INPUT MODE), Other Operations, Audio input modes

Other Operations

Switching between digital and analog audio

(INPUT MODE)

You can select the audio input mode setting when you connect components to both digital and analog audio input jacks on the receiver.

1 Turn INPUT SELECTOR on the receiver to select the input.

You can also use the input buttons on the remote.

2 Press INPUT MODE repeatedly on the receiver to select the audio input mode.

The selected audio input mode appears on the display.

Audio input modes

xAUTO IN

Gives priority to digital audio signals when there are both digital and analog connections. If there are no digital audio signals, analog audio signals are selected.

Enjoying the DIGITAL MEDIA PORT

(DMPORT)

The DIGITAL MEDIA PORT (DMPORT) allows you to enjoy sound from a network system such as a portable audio source or computer.

By connecting a DIGITAL MEDIA PORT adapter (not supplied), you can enjoy sound from the connected component on the receiver.

For details, see the operating instructions supplied with the DIGITAL MEDIA PORT adapter.

Notes

•Do not connect an adapter other than the DIGITAL MEDIA PORT adapter.

•Do not connect or disconnect the DIGITAL MEDIA PORT adapter while the receiver is turned on.

•Depending on the DIGITAL MEDIA PORT adapter, video output may not be possible.

•The DIGITAL MEDIA PORT adapters are available for purchase depending on the area.

Operations Other

xCOAX IN

Specifies the digital audio signals input to the

DIGITAL COAXIAL jack.

xOPT IN

Specifies the digital audio signals input to the

DIGITAL OPTICAL jack.

xANALOG

Specifies the analog audio signals input to the

AUDIO IN (L/R) jacks.

Note

Some audio input modes may not be set up depending on the input.

61GB