Naming inputs

You can enter a name of up to 8 characters for inputs and display it on the receiver’s display. This is convenient for labeling the jacks with the names of the connected components.

1 Press the input button to select the input you want to create an index name for.

You can also use INPUT SELECTOR on the receiver.

2 Press RECEIVER.

The RECEIVER indicator lights up and receiver operation is activated.

3 Press MENU.

“1-LEVEL” appears on the display.

4 Press V/v repeatedly to select either “5-AUDIO” or “6-VIDEO”.

5

Press

or b to enter the

 

menu.

 

6

Press V/v to select “NAME IN”.

7

Press

or b to enter the

 

parameter.

The cursor flashes and you can select a character. Follow the procedure given in “To create an index name” (page 59).

Changing the display

You can check the sound field, etc., by changing the information on the display.

Be sure to use the buttons on the receiver for this operation.

Press DISPLAY repeatedly.

Each time you press the button, the display changes cyclically as follows.

All inputs except the FM and AM band

Index name of the inputa) t Selected input

tSound field currently applied

FM and AM band

Program Service nameb) or preset station namea) t Frequency t Program Type indicationb) t Radio Text indicationb) t Current Time indication (in 24-hour system mode)b) t Sound field currently applied

a)Index name appears only when you have assigned one to the input or preset station (page 58, 64). Index name does not appear when only blank spaces have been entered, or it is the same as the input name.

b)During RDS reception only (page 59).

Note

Character or marks may not be displayed for some languages.

64GB