Dolby Digital or DTS multi channel sound is not reproduced.
•Check that the DVD, etc. you are playing is recorded in Dolby Digital or DTS format.
•When connecting the DVD player, etc., to the digital input jacks of this receiver, check the audio setting (the settings for the audio output) of the connected component.
Recording cannot be carried out.
•Check that the components are connected correctly.
•Select the source component using the input buttons (page 35).
VideoThere is no picture or an unclear picture appears on the TV screen or monitor.
•Select the appropriate input using the input buttons.
•Set your TV to the appropriate input mode.
•Move your audio components away from the TV.
•Assign the composite video input to DMPORT input correctly.
•Depending on the DIGITAL MEDIA PORT adapter, video output may not be possible.
The source image input to the HDMI jack on the receiver is not output from the TV.
•Check the HDMI connection.
•Depending on the playback component, you may need to set up the component. Refer to the operating instructions supplied with the each component.
Recording cannot be carried out.
•Check that the components are connected correctly.
•Select the source component using the input buttons (page 35).
TunerThe FM reception is poor.
•Use a
Outdoor FM antenna
Receiver
ANTENNA
AM
Ground wire (not supplied)
To ground
Radio stations cannot be tuned in.
•Check that the antennas are connected securely. Adjust the antennas and connect an external antenna, if necessary.
•The signal strength of the stations is too weak (when tuning in with automatic tuning). Use direct tuning.
•Make sure you set the tuning interval correctly (when tuning in AM stations with direct tuning).
•No stations have been preset or the preset stations have been cleared (when tuning by scanning preset stations). Preset the stations (page 56).
•Press DISPLAY repeatedly on the receiver so that the frequency appears on the display.
76GB