You can set the receiver to turn off automatically at a specified time.
Press SLEEP repeatedly while the power is on.
Each time you press the button, the display changes cyclically as follows:
tOFF
When sleep timer is activated, the display dims.
Note
If you press any buttons on the remote or receiver after the display dims, the display brightens up. After a while, the display dims again if no button is pressed.
Tip
To check the remaining time before the receiver turns off, press SLEEP. The remaining time appears on the display. If you press SLEEP again, the sleep timer will be canceled.
You can record onto a
1 Press one of the input buttons to select the playback component.
You can also use INPUT SELECTOR on the receiver.
2 Prepare the playback component for playing.
For example, tune to the radio station you want to record (page 55).
3 Prepare the recording component.
Insert a blank
4 Start recording on the recording component, then start playback on the playback component.
Note
Sound adjustments do not affect the signal output from the
65GB
Operations Other