Insert two R6
Observe the correct polarity when installing batteries.
You can select the front speakers you want to drive.
Be sure to use the buttons on the receiver for this operation.
SPEAKERS (OFF/A/B/A+B)
?/1
|
|
|
|
|
|
|
| MASTER VOLUME | |
|
|
|
|
|
|
| DISPLAY | INPUT MODE |
|
|
|
|
|
|
|
| INPUT SELECTOR |
| |
SPEAKERS |
|
|
|
|
|
|
|
|
|
(OFF/A/B/A+B) |
|
|
|
|
|
|
|
|
|
AUTO CAL MIC |
|
|
|
|
|
|
|
|
|
| MEMORY/ | TUNING | TUNING | 2CH | A.F.D. | MOVIE | MUSIC |
|
|
| ENTER | MODE | AUTO CAL | MUTING | |||||
VIDEO 3 IN/PORTABLE AV IN |
|
|
|
|
|
|
|
| |
PHONES |
|
|
|
|
|
|
|
|
|
VIDEO | L AUDIO R |
|
|
|
|
|
|
|
|
Notes
•Do not leave the remote in an extremely hot or humid place.
•Do not use a new battery with old ones.
•Do not mix alkaline batteries and other kinds of batteries.
•Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction.
•If you do not intend to use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.
•When you replace the batteries, the programmed remote codes may be cleared. If this happens, program the remote codes again (page 66).
Tip
Under normal conditions, the batteries should last for about 3 months. When the remote no longer operates the receiver, replace all the batteries with new ones.
Press SPEAKERS (OFF/A/B/A+B) repeatedly to select the front speaker system you want to drive.
To select | Light up |
The speakers connected to the | SP A |
SPEAKERS FRONT A terminals |
|
|
|
The speakers connected to the | SP B |
SPEAKERS FRONT B terminals |
|
|
|
The speakers connected to both the | SP A and |
SPEAKERS FRONT A and B | SP B |
terminals (parallel connection) |
|
|
|
Press SPEAKERS (OFF/A/B/A+B) repeatedly until the “SP A” and “SP B” indicators on the display do not light up.
Note
You cannot switch the front speakers by pressing SPEAKERS (OFF/A/B/A+B) when the headphones are connected.
30GB