The test tone is output from each speaker in sequence as follows:
Front left t Center t Front right t Surround right t Surround left t Sub woofer
7 Adjust the speaker levels and balance using the LEVEL menu so that the level of the test tone sounds the same from each speaker.
Tips
• To adjust the level of all speakers at the same time, press MASTER VOL +/–. You can also use MASTER VOLUME on the receiver.
• The adjusted value are shown on the display during adjustment.
8 Repeat steps 1 to 6 to select “T. TONE N”.
You can also press any input buttons. The test tone turns off.
34US
Press the parameter.
or b to enter the
Press V/v repeatedly to select “T. TONE”.
Press the menu.
or b to enter the
“1-LEVEL” appears on the display.
Press MENU.
2
3 4
5
6 Press V/v repeatedly to select “T. TONE Y”.
Press RECEIVER.
The RECEIVER indicator lights up and receiver operation is activated.
1

When a test tone is not output from the speakers

The speaker cords may not be connected securely.

The speaker cords may have the short-circuit problem.