The MULTI CHANNNEL DECODING lamp does not light up.
•Check that the playback component is connected to a digital jack and the input is selected properly on this receiver.
•Check whether the input source of the software being played back corresponds to the multi channel format.
•Check whether the setup on the playback component is set to multi channel sound.
The source sound input to the HDMI jack on the receiver is not output from the TV speaker.
•Check the HDMI connection.
•You cannot listen to the Super Audio CD by connecting HDMI.
•Depending on the playback component, you may need to set up the component. Refer to the operating instructions supplied with each component.
Recording cannot be carried out.
•Check that the components are connected correctly.
•Select the source component using the input buttons.
Video
There is no picture or an unclear picture appears on the TV screen or monitor.
•Select the appropriate input using the input buttons.
•Set your TV to the appropriate input mode.
•Move your audio components away from the TV.
•Assign the composite video input to DMPORT input correctly.
•Depending on the DIGITAL MEDIA PORT adapter, video output may not be possible.
Recording cannot be carried out.
•Check that the components are connected correctly.
•Select the source component using the input buttons.
The source image input to the HDMI jack on the receiver is not output from the TV.
•Check the HDMI connection.
•Depending on the playback component, you may need to set up the component. Refer to the operating instructions supplied with the each component.
Tuner
The FM reception is poor.
•Use a
Outdoor FM antenna
Receiver | Additional | |
| ||
ANTENNA |
| |
AM | Information | |
Ground wire | ||
| ||
(not supplied) |
| |
To ground |
|
continued
75US