If color irregularity is observed

again...

Place the speaker further away from the TV set.

If howling occurs

Reposition the speakers or turn down the volume on the receiver.

On cleaning

Clean the cabinet, panel, and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzine.

If you have any questions or problems concerning your receiver, please consult your nearest Sony dealer.

Troubleshooting

If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem.

Audio

There is no sound, no matter which component is selected, or only a very low-level sound is heard.

• Check that the speakers and components

 

are connected securely.

 

• Check that both the receiver and all

 

components are turned on.

 

• Check that MASTER VOLUME is not set

 

to “VOL MIN”.

 

• Check that the SPEAKERS (OFF/A/B/

 

A+B) is not set to “OFF”.

 

• Check that headphones are not connected.

 

• Press MUTING to cancel the muting

 

function.

 

• Check that you have selected the correct

 

component with the input buttons.

 

• The protective device on the receiver has

 

been activated. Turn off the receiver,

 

 

eliminate the short-circuit problem, and

 

 

turn on the power again.

Additional

 

 

There is no sound from a specific

 

component.

 

• Check that the component is connected

Information

correctly to the audio input jacks for that

 

component.

 

• Check that the cord(s) used for the

 

connection is (are) fully inserted into the

 

jacks on both the receiver and the

 

component.

 

continued

73US