Press RM SET UP.
The RM SET UP indicator slowly flashes.

Using the Remote

Programming the remote

You can program the remote to control non- Sony components by changing the code. Once the control signals have been memorized, you can use those components as part of your system.

Furthermore, you can also program the remote for Sony components that the remote is unable to control. Note that the remote can only control components that accept infrared wireless control signals.

1

2 Press the input button for the component you want to control.

For example, if you are going to control a CD player, press SA-CD/CD. The RM SET UP indicator lights up.

3 Press the numeric buttons to enter the numeric code (or one of the codes if more than one code exists) corresponding to the component and the maker of the component you want to control (except TV).

See the tables on pages 67-70for information on the numeric code(s) corresponding to the component and the maker of the component (the first digit and the last two digits of the numeric code correspond to the category and the maker’s code respectively).

4 Press ENTER.

Once the numeric code has been verified, the RM SET UP indicator slowly flashes twice and the remote automatically exits the programming mode.

5 Repeat steps 1 to 4 to control other components.

Notes

•The indicator turns off while a valid button is pressed.

•In step 2, if several input buttons are pressed, only the last pressed button is valid.

•In step 2, if you press TUNER, you can only program the button to control a tuner (page 70).

•In step 3, if an input button is pressed, the new input is selected and the programming procedure returns to the beginning of step 3.

•For the numeric codes, only the last three numbers entered are valid.

To program the remote to control a TV

1Press RM SET UP.

The RM SET UP indicator slowly flashes.

2Press TV.

3Press the numeric buttons to enter the numeric code (or one of the codes if more than one code exists) for TV. For details, see page 69.

4Press ENTER.

Once the numeric code has been verified, the RM SET UP indicator slowly flashes twice and the remote automatically exits the programming mode.

To cancel programming

Press RM SET UP during any step. The RM SET UP indicator flashes 5 times in quick succession. The remote automatically exits the programming mode.

To activate the input after programming

Press the programmed button to activate the input you want.

66US