Getting Started

Before You Use Your Amplifier

Before you use your amplifier for the first time or when you want to clear the amplifier’s memory, do the procedure below:

?/1 (power)

1Turn off the amplifier.

2Press ?/1 (power) for more than 4 seconds. “INITIAL” appears in the display and the items including the following are reset or cleared:

All sound field parameters are reset to their factory settings.

The fan control setup is reset to FAN ON.

Note

If you are using a Sony DVD player together with this home theater system, set your DVD player to the following configuration:

Speakers

Settings

 

 

Front

SMALL

 

 

Center

SMALL

 

 

Rear

SMALL

 

 

Subwoofer

YES

 

 

If you are using a non Sony DVD player, refer to the operating instructions supplied with the DVD player for speaker setup.

10GB