Amplifier Operations | Amplifier Operations |
To listen to a connected component, first select the function on the amplifier or with the remote. Before you begin, make sure you have:
•Connected all components securely and correctly as indicated on pages 5 to 9.
1/u (power) | MASTER VOLUME |
Function buttons
1Press 1/u (power) to turn on the amplifier.
2Turn MASTER VOLUME to VOL MIN (indicated on the display) to avoid damaging your speakers.
3Press a function button to select the component you want to use:
To watch | Press | TV input mode |
|
|
|
Video tapes | VIDEO | VIDEO |
|
|
|
TV programmes | TV | VIDEO |
|
|
|
Digital versatile disc | DVD 2CH | VIDEO |
(DVD) |
|
|
|
|
|
DVD through | 5.1 CH/DVD | VIDEO |
|
| |
|
|
|
To operate with the remote
Refer to “Using the remote” on page 12 for details.
4Turn on the component, the VCR for example, and start playback.
5Turn MASTER VOLUME to adjust the volume.
To | Do this |
|
|
Mute the sound | Press MUTING on the remote. |
| Press again to restore the sound. |
|
|
Watching video programmes
To take full advantage of the amplifier’s surround sound effects, like Dolby Surround, turn off the speakers on your TV before you start. This also lets you use the amplifier’s remote to control the sound.
To watch TV programmes, do the following:
1Turn on your TV.
2Turn on the amplifier and press TV.
To watch videos or DVDs, do as follows:
1Turn on your TV and set the TV’s input to match the video component you watch.
2Turn on the amplifier and press the function button (VIDEO, DVD 2CH or 5.1 CH/DVD) to select the component you want to use.
3Turn on the video component and start playback.
(continued)