Amplifier Operations

Changing the Factory Setting of a FUNCTION Button

If the factory settings of the SYSTEM CONTROL/ FUNCTION buttons (“Using the remote” on page 12) don’t match your system components, you can change them. The following table shows the possibility of alternate function assignment for each button.

Button

Possible assignment

 

 

VIDEO

VTR 1, VTR 2, VTR 3

 

 

DVD

DVD, LDP, CD

 

 

*Initial setting of VIDEO is VTR 3.

*Sony VCRs are operated with a VTR 1, 2, or 3 setting that corresponds to Beta, 8mm, and VHS, respectively.

Resetting key table for function key VIDEO

VTR 1

CURSOR UP

 

 

VTR 2

ENTER/EXECUTE

 

 

VTR 3

CURSOR DOWN

 

 

Resetting key table for function key DVD

DVDEXIT/RETURN

LDDISPLAY

CD

CURSOR RIGHT

 

 

SYSTEM

CONTROL/

FUNCTION

MENU control keys

For example, if you connect a Sony LD player to the DVD jacks, you can assign the DVD button to set the remote to control the LD player.

1Hold down the SYSTEM CONTROL/FUNCTION button whose function you want to change (DVD, for example).

2Press the corresponding button of the component you want to assign to the SYSTEM CONTROL/ FUNCTION button (DISPLAY, LD player, for example).

Now you can use the DVD button to control your Sony LD player.

To reset a button to its factory setting

Repeat the above procedure.

To reset all the function buttons to their factory setting

Press ?/1, AV ?/1 and MASTER VOL – at the same time.

13GB