21US
Getting Started

5: Connecting the

antennas

Connect the supplied AM loop antenna and
FM wire antenna.
Before connecting the antennas, be sure to
disconnect the AC power cord (mains lead).
* The shape of the connector varies depending on
the area code of this receiver.
Notes
• To prevent noise pickup, keep the AM loop
antenna away from the receiver and other
components.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as
horizontal as possible.

6: Preparing the receiver

and the remote

Connect the AC power cord (mains lead) to a
wall outlet.
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
Be sure to use the buttons on the receiver for
this operation.
1Press ?/1 to turn on the
receiver.
2Hold down ?/1 for 5 seconds.
“CLEARED” appears.
All the settings you have changed or
adjusted are reset to the initial settings.
R
T
HDMI
m
A MAX
BD IN OUTSAT INDVD IN
AUDIO IN
VIDEO 1 VIDEO 2
L
R
L
R
AUDIO IN
SA-CD
/
CD
COAX IN
SAT
OPT IN OPT INAUDIO IN
TV
DIGITAL TV
AM
ANTENNA
FM wire antenna (supplied)
AM loop antenna (supplied)

Connecting the AC power cord

(mains lead)

Performing initial setup

operations

FRONT R
SPEAKERS
FRONT L SUR R SUR L CENTER
AC power cord (mains lead)
To the wall outlet
ACTIVE STANDBY
INPUT SELECTOR
MASTER VOLUME
?/1

1,2