46US
Note
Depending on the connected component, the
Control for HDMI function may not work. Refer to
the operating instructions of the component.
Preparing for the
“BRAVIA” Sync
To use the “BRAVIA” Sync, set the Control
for HDMI function to on for both the receiver
and the connected component. The receiver is
compatible with the “Control for HDMI-Easy
Setting” function.
When your TV is compatible
with the “Control for HDMI-Easy
Setting” function
When you connect a Sony TV with the
“Control for HDMI-Easy Setting” function,
the Control for HDMI function of the receiver
can be turned on simultaneously by turning the
Control for HDMI function of the TV on.
1Make sure that the receiver, TV, and
playback components are connected
using an HDMI cable (not supplied).
(The respective components must be
compatible with the Control for HDMI
function.)
2Turn on the receiver, TV and playback
components.
3Turn the Control for HDMI function of
the TV on.
The Control for HDMI function of this
receiver and all the connected components
are simultaneously turned on.
During setup, “SCANNING” appears in
the display, and once setting is completed,
“COMPLETE” will appear. Wait until the
setup is complete.
For details on setting the TV, refer to the
operating instructions supplied with the TV.