48US

Playing back components

with one-touch operation

(One-Touch Play)

You can enjoy sound and image from the
components connected to the receiver via
HDMI connections by a simple operation.
Play back a connected component.
The receiver and the TV are turned on
automatically and switched to the appropriate
HDMI input.
Note
Be sure that the System Audio Control setting is set
to on.

Watching a DVD/Blu-ray disc by

simple operation

You can also select a connected component,
such as a DVD/Blu-ray disc player using the
TV menu. In this case, the receiver and the TV
switch to the appropriate HDMI input.
Note
Depending on the TV, the start of the content may
not be output.
Tip
You can enjoy the components that are connected to
the HDMI jacks, even if you turn the receiver off.
The ACTIVE STANDBY indicator lights up in
amber.

Enjoying the TV sound

from the speakers

connected to the receiver

(System Audio Control)

You can enjoy the TV sound from the speakers
connected to the receiver by a simple
operation.
You can operate System Audio Control
function using the TV menu. For details, refer
to the operating instructions supplied with the
TV.
When System Audio Control function is
turned on, the receiver will turns on and
switches to the appropriate input
automatically.
TV sound is output from the speakers
connected to the receiver, and the volume of
the TV is minimized simultaneously.
You can use the System Audio Control
function as follows.
If you turn on the receiver while the TV is
turned on, the System Audio Control
function will automatically be set to on and
the TV sound will output from the speakers
connected to the receiver. However, if you
turn off the receiver, the sound will output
from the TV speakers.
You can adjust the receivers volume when
you adjust the TV volume.
Notes
If System Audio Control does not function
according to your TV setting, refer to the operating
instructions supplied with the TV.
• When you connect a TV that does not have System
Audio Control function, the System Audio Control
function does not work.
If the TV is turned on before turning on the
receiver, the TV sound will not be output for a
moment.