27US
Getting Started
8: Adjusting the speaker
levels
(TEST TONE)
You can adjust the speaker levels while
listening to the test tone from your listening
position.
1Press AMP MENU.
“SET HDMI” appears on the display.
2Press V/v repeatedly until
“LEVEL” appears, then press
or b.
3Press V/v repeatedly until
“T. TONE” appears, then press
or b.
4Press V/v repeatedly to select
“T. TONE Y”, then press .
The test tone is output from each speaker
in sequence as follows:
Front left t Center t Front right t
Surround right t Surround left t
Subwoofer
5Press B until “T. TONE”
appears.
6Press V/v repeatedly to select
the desired speaker, then press
or b.
The test tone is emitted from the speaker
that is being adjusted only.
• FL LVL: adjusts the front left speaker
level.
• CNT LVL: adjusts the center speaker
level.
• FR LVL: adjusts the front right speaker
level.
• SR LVL: adjusts the surround right
speaker level.
• SL LVL: adjusts the surround left
speaker level.
• SW LVL: adjusts the subwoofer level.
Notes
• “CNT LVL” does not appear when you set
“CNT N” in the “SP SETUP” setting.
• “SR LVL” and “SL LVL” do not appear when
you set “SUR N” in the “SP SETUP” setting.
7Press V/v repeatedly to adjust
the speaker level, then press
or b.
You can adjust from –6.0 dB to +6.0 dB
in 0.5 dB steps.
Note
If you do not adjust for a certain period, the test
tone is emitted from the next speaker in
sequence.
8Repeat step 6 and 7 to adjust
the other speaker level.
9After you have finished making
adjustments, press V/v until
“T. TONE” appears, then press
or b.
10Press V/v repeatedly to select
“T. TONE N”, then press .
11Press AMP MENU.
The AMP menu turns off.
When a test tone is not output
from the speakers
• The speaker cords may not be connected
securely.
• The speaker cords may have the short-circuit
problem.
• The test tone signals are not output from the
HDMI OUT jack.
0
ENTER
RETURN/EXIT
AMP MENU
CLEAR
DISPLAY MUTING
MASTER VOL
TV VOL
TOOLS/
OPTIONS
MENU/HOME
AMP
MENU
MASTER
VOL +/–
,
V,v,B,b