23US
Getting Started
Before you perform the Auto Calibration, set
up and connect the speakers (page 13, 15).
The AUTO CAL MIC jack is used for the
supplied optimizer microphone only. Do not
connect other microphones to this jack.
Doing so may damage the receiver and the
microphone.
During the calibration, the sound that comes
out of the speakers is very loud. The volume
of the sound cannot be adjusted. Pay
attention to the presence of children or to the
effect on your neighborhood.
Perform the Auto Calibration in a quiet
environment to avoid the effect of noise and
to get a more accurate measurement.
If there are any obstacles in the path between
the optimizer microphone and the speakers,
the calibration cannot be performed
correctly. Remove any obstacles from the
measurement area to avoid measurement
error.
Notes
If the muting function has been activated before
you perform Auto Calibration, the muting function
will be set to off automatically.
When you use the S-AIR product, disconnect the
headphones.
Example:
1Connect the supplied optimizer

microphone to the AUTO CAL

MIC jack.

2Set up the optimizer

microphone.

Place the optimizer microphone at your
listening position.You can also use a stool
or tripod so that the optimizer
microphone remains at the same height as
your ears.
Tip
When you face the speaker towards the optimizer
microphone, you will get a more accurate
measurement.

Before you perform Auto

Calibration AM
ANTENNA
DMPORT
FRONT R
HDMI
EZW-T100
SPEAKERS
FRONT L SUR R SUR L CENTER
SUBWOOFER
DC5V 700mA MAX
BD IN OUTSAT INDVD IN
AUDIO IN
VIDEO 1
VIDEO 2
L
R
L
R
AUDIO IN
SA-CD
/
CD
COAX IN
SAT
OPT IN OPT INAUDIO IN
TV
DIGITAL TV
AUTO
CAL MIC
Optimizer
microphone