Sony 4-130-033-13(1), HT-SF360 Listening to FM/AM radio, 1

42US

Notes

• The effects provided by the virtual speakers may

cause increased noise in the playback signal.

• When listening with sound fields that employ the

virtual speakers, you will not be able to hear any

sound coming directly from the surround speakers.

• This function does not work when:

– signals with a sampling frequency of more than

48 kHz is input.

– the multi channel Linear PCM signals are

received via an HDMI IN jack.

• The sound is not output from multiple speakers

depending on the source.

• Depending on the disc or source, the beginning of

the sound may be cut off as the optimum mode is

automatically selected. To avoid cutting the sound,

select “A.F.D. STD.”.

• When the input signal is multi channel source,

Dolby Pro Logic II MOVIE/MUSIC are canceled

and the multi channel source is output directly.

• When the bilingual broadcast sound is input, Dolby

Pro Logic II MOVIE/MUSIC are not effective.

• Multi channel Linear PCM is not available for

“P. AUDIO.”

• Depending on the input stream, the decoding mode

may not be effective.

• When you select “MV-D.C.S.-” depending on the

input stream, Dolby Pro Logic may be applied

automatically.

• When changing the sound mode while using the

S-AIR receiver (not supplied), sound from the

S-AIR receiver (not supplied) may skip.

Tip

You can identify the encoding format of DVD

software, etc., by looking at the logo on the package.

Listening to FM/AM radio

You can listen to FM and AM broadcasts

through the built-in tuner. Before operation,

make sure you have connected the FM and

AM antennas to the receiver (page 21).

Tip

The tuning scale for direct tuning differs depending

on the area code as shown in the following table. For

details on area codes, see page 4.

* The AM tuning scale can be changed (page 44).

1Press TUNER repeatedly to

select the FM or AM band.

You can also use INPUT SELECTOR on

the receiver.

Tuner Operations

Area code FM AM

UC 100 kHz 10 kHz*

MX 50 kHz 10 kHz*

Tuning into a station

automatically (Auto Tuning)

123

46

78

0

ENTER

9

VIDEO1 VIDEO2 BD DVD

RETURN/EXIT

TV CH

–

PRESET

–

TV CH

+

PRESET

+

TUNING

–

TV

TUNING

+

REPLAY ADVANCE

F1MENUTOP MENU F2

AMP MENU

CLEAR

DISPLAY MUTING

MASTER VOL

TV VOL

SOUND

FIELD

FAVORITESWIDE

PICTURE

JUMP

THEATER

SA-CD/CDTV TUNER

.

H

mM

Xx

<

<

>

5

TOOLS/

OPTIONS

MENU/HOME

SAT

BD/DVD

GUIDE

TUNING +

TUNER

MENU/

HOME

DISPLAY

,

V,v,B,b

TUNING –

Contents

Main To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. For customers in the United States, Canada and Mexico For customers in the United States WARNING Owners Record Important Safety Instructions CAUTION About This Manual On Copyrights The HT-SF360 consists of: About area codes Table of Contents Getting Started Playback Amplifier Operations Enjoying Surround Sound Description and location of parts Front panel 25641 73 Indicators on the display 2 4 5 61 3 7 8 9q;qaqsqd Rear panel 1 2 5 6 734 ASPEAKERS section BS-AIR (EZW-T100) CDMPORT Remote commander 1 3 2 6 7 8 q; qa 9 1 C (TV, BD, DVD, or SAT) to select the component you want to operate. The component assigned to the selected input button becomes operable. 2 press the corresponding button for the operation. To control the DVD recorder/Blu-ray Disc recorder To control the DVD player/ Blu-ray Disc player To control the HDD/DVD COMBO To control the SAT 1: Installing the speakers Example of subwoofer Getting Started Installing the speakers on a flat surface Installing the speakers on the speaker stand You can install your speakers on the wall. 1 For the front speakers that are suitable for the hook on the back of each speaker. See the illustrations below. 2 The screws should protrude 7/32 to 9/32 inch. 2: Connecting the speakers Note on speaker cords D ASpeaker cord (supplied) E 3: Connecting the TV BC BOptical digital cord (not supplied) CHDMI cable (not supplied) 4: Connecting the audio/ video components Component to be connected B How to hook up your components Connecting audio components Connecting components with HDMI jacks Notes on HDMI connections AAA AHDMI cable (not supplied) BOptical digital cord (not supplied)b) CAudio cord (not supplied)b) ABC Connecting video components BC BCoaxial digital cord (not supplied) COptical digital cord (not supplied) 5: Connecting the antennas 6: Preparing the receiver and the remote 1,2 1 2 7: Calibrating the appropriate settings automatically (AUTO CALIBRATION) Inserting batteries into the remote 1 microphone to the AUTO CAL MIC jack. 2 microphone. Before you perform Auto Calibration 2 A.CAL. 3 START appears on the display. 4 1 result. When the measurement ends, a beep sounds and the measurement result appears on the display. 2 the item. Then, press . 2 A.CAL appears, then press or b. 3 A.CAL CLR, then press or b. 4 8: Adjusting the speaker levels (TEST TONE) 2 3 4 Selecting a component 1 a component. You can also use INPUT SELECTOR on the receiver. The selected input appears on the display. 2 Enjoying sound/images from the components connected to the receiver 1 program. For details, refer to the operating 2 3 4 Page 1 2 Navigating through menus 2 3 4 5 Amplifier Operations Overview of the menus Page Amplifier Operations Settings for the HDMI (SET HDMI menu) SET HDMI menu parameters xCONTROL FOR HDMI (Control for HDMI) xVOL LIM (Volume limit) Settings for the Speaker (SP SETUP menu) SP SETUP menu parameters Adjusting the level (LEVEL menu) LEVEL menu parameters Adjusting the tone (TONE menu) Settings for the Custom Menu (CUSTOM menu) CUSTOM menu parameters xDUAL (Digital broadcast language selection) xA/V SYNC (Synchronizes audio with video output) Settings for the S-AIR (S-AIR menu) Enjoying Surround Sound Selecting the sound field Press SOUND FIELD repeatedly to select the sound field you want. For details, see Types of sound field available (page 41). Types of sound field available Enjoying Surround Sound Listening to FM/AM radio 1 select the FM or AM band. You can also use INPUT SELECTOR on Tuner Operations 2 If an FM program is noisy 1 2 MODE appears, then press 3 2 TUNING until the auto scanning starts. 3 4 MEMORY appears in the display. Presetting radio stations Page 6 V/v/B/b. If you enter a wrong character 7 8 Preparing for the BRAVIA Sync When your TV is compatible with the Control for HDMI-Easy Setting function 1 2 3 When your TV is not compatible with the Control for HDMI-Easy Setting function 1 2 3 4 5 6 Playing back components with one-touch operation (One-Touch Play) Play back a connected component. Watching a DVD/Blu-ray disc by simple operation Enjoying the TV sound from the speakers connected to the receiver 2 HDMI appears, then press 3 LIM appears, then press or b. 4 Using the Power Saving function (Power Save) The AMP MENU turns off. SET HDMI appears on the display. 2 Page Page Using an S-AIR Product About S-AIR products Inserting the wireless transmitter/transceiver To insert the wireless transmitter into the S-AIR main 1 2 3 To insert the wireless transceiver into the S-AIR sub To set the ID of the S-AIR main S-AIR ID. the desired ID (A, B or C) then To exit the menu 1 2 3 4 5 6 1 to match the S-AIR main unit. 2 3 4 5 7 the setting you want. 8 the S-AIR product. 9 2 3 4 5 6 2 3 4 5 6 Changing the input button assignments 1 which you want to change the assignment. Using the Remote 2 press the corresponding button for the category you want. Categories and the corresponding buttons for BD, DVD, and SAT To clear all remote button assignments Glossary xDTS Digital Surround xHDMI (High-Definition Multimedia Interface) xL.F.E. (Low Frequency Effects) xS-AIR (Sony Audio Interactive Radio frequency) xS-master Precautions On safety On power sources On heat buildup On placement Troubleshooting Audio Video HDMI S-AIR function Tuner Remote control Others Error messages If you are unable to remedy the problem using the troubleshooting guide If the problem persist Specifications AUDIO POWER SPECIFICATIONS FM tuner section AM tuner section General Speaker section Page Index A B C D