53US

Other Operations

Using an S-AIR Product

The unit is compatible with the S-AIR
function (page 62), which allows wireless
sound transmission between S-AIR products.
When you purchase the S-AIR product, you
need to perform the following settings to
establish the sound transmission.

About S-AIR products

There are two types of S-AIR product.
S-AIR main unit (this receiver):
The S-AIR main unit is for transmitting
sound.
You can use up to 3 S-AIR main units. (The
number of usable S-AIR main unit depends
on the use environment.)
S-AIR sub unit (not supplied): The S-AIR
sub unit is for receiving sound.
– Surround amplifier: You can enjoy
surround speaker sound wirelessly.
S-AIR receiver: You can enjoy system
sound in another room.
These S-AIR products can be purchased as an
option (the S-AIR products lineup differs
depending on the area).
Notes or instruction from the surround
amplifier or S-AIR receiver in this operating
instructions is refer only when the surround
amplifier or S-AIR receiver is used.
To make use of the S-AIR function, you need
to insert the wireless transmitter (not supplied)
into the S-AIR main unit and the wireless
transceiver (not supplied) into the S-AIR sub
unit.
Notes
Before inserting the wireless transmitter/
transceiver, be sure to disconnect the AC power
cord (mains lead).
Do not touch the terminals of the wireless
transmitter/transceiver.

Inserting the wireless

transmitter/transceiver

ACTIVE STANDBY
INPUT SELECTOR
MASTER VOLUME
?/1
S-AIR sub unit
(S-AIR receiver)
S-AIR main unit
(this receiver)
S-AIR sub unit
(surround amplifier)
Room B
Room A
continued